Hi,
welcher Midi-Foot-Controller ist geeignet, um den Tuner im Display anzuzeigen?
Hi,
welcher Midi-Foot-Controller ist geeignet, um den Tuner im Display anzuzeigen?
Sehr bald der Behringer FCB 1010 mit einem speziell dafür gemachten Eprom.
Später dann der der Kemper- Footcontroller.
Moin, sollte der EPROM nicht nach der Messe kommen (Ich weiß, es ist jetzt nach der Messe )?
Shouldn´t the EPROM be available after the Musikmesse?
Well, yes.
But only 10 days after the Messe I wouldn't bug the guys, yet...
Und wenn wir dann die SysEx-Daten auslesen, kann es auch die Liquid Foot. Hoffentlich.
... und wie sieht es mit dem MFC-101 oder Ground Control Pro aus?
Hat damit jemand Erfahrungen? - bzgl. Tuner-Nutzung.
Wobei ich mehr Hoffnung in das MFC lege, da ja das GCP (soweit ich informiert bin)
keine derart Daten empfngen kann.
Geht beides nicht. Die MFC wird von FAS auch sicher nicht so geupdatet werden, dass sie die Tunersignale vom KPA darstellt.
Das FCB1010 zeigt eine Tuner-Display mit dem neuen EPROM? Das ist große Neuigkeit!
The Fcb1010 will show a tuner display with the new EPROM? That is big news!
Please keep it English guys! This info is of interest for anyone.
The Fcb1010 will show a tuner display with the new EPROM? That is big news!
Can anybody confirm this? Bidirectional communication with KPA and FBC1010? Somehow i can´t belive this...
Can anybody confirm this? Bidirectional communication with KPA and FBC1010? Somehow i can´t belive this...
I was told exactly this at the Messe.
Can anybody confirm this? Bidirectional communication with KPA and FBC1010? Somehow i can´t belive this...
Yes, got the same info at Musikmesse and tried out the first prototype FCB. Pretty nice and easy to use. The tuner mode was not included but communication was bidirectional.
communication was bidirectional.
That IS great news... Glad i still have my FCB1010....
That really is very good since I will probably be pretty broke when I've got my KPA and then being able to control all with a quite cheap midi controller is awesome
Only little downside was that at least for the prototype you need to midi connections. I was (or is) not possible to have it all with just one cable with the FCB. But I can live with that.
I was told exactly this at the Messe.
The Kemper FCB must be connected with two MIDI cables. It will have bidirectional communication in terms of switching Rigs/Performances/Slots is reflected on the FCB as well as it can be controlled from the FCB. The FCB will also recognize the chicken head modes and will display the tuner information in tuner mode. You can also switch Slots on/off with it, the FCB does reflect this state as well, when edited on the KPA.
Timo
Thanks!
Wow... I'd bet the proprietary FC would use the Ethernet jack
Wondering what would its use be at this point
Wow... I'd bet the proprietary FC would use the Ethernet jack
Wondering what would its use be at this point
He's talking about the Behringer
Uh, you're right, I just missed to check the link
...Feel as usual again, now
Looking at getting a controller for the kemper. I see some buzz about this controller. A few questions
1. Is there a lot of setup to make it work with kemper? What all has to be programmed? Plug and play or some ground work need to be done ?
2. What chip is needed to get maximum performance
FCB-1010 Foot Controller ( OS/Firmware UnO Revision
FCB-1010 Foot Controller ( OS/Firmware ver 2.50
3. Any detailed instruction on chip replacement and what to do after replacing it
4. Can this controller not only change profiles but also turn a stomp or effect on or off. I assume it can but has to be programmed?
5. Is there any documentation anywhere that is used when programming as a guide. Kemper midi doc and FCB 1010 Manual only?
New to midi controller programming . Any answers are much appreciated.
Just thought this pedal would be more economical than purchasing 2 mission pedals expression pedals and a board from kemper whenever it comes out.