what are the output settings? (Treble, Presence and High Cut)
Main output EQ
bass (0.0) middle (0.0) treble (0.0) presence (0.0)
Look how awesome Kemper users are.
-
AdamMassacre1981 -
February 10, 2023 at 11:13 AM -
Thread is marked as Resolved.
-
Main output EQ
bass (0.0) middle (0.0) treble (0.0) presence (0.0)
What about the high cut?
-
Here’s a thought, I have the crank and go pack, should I record some things and you can see if mine have that annoyance? This thread has grown arms and legs so maybe this has been done before. If so feel free to ignore.
-
Here’s a thought, I have the crank and go pack, should I record some things and you can see if mine have that annoyance? This thread has grown arms and legs so maybe this has been done before. If so feel free to ignore.
I shared the exact profile i used to record those 3 samples from 3 different guitars maybe you could download it and record a profile with that one
EDIT: record a SAMPLE not a profile.
-
High cut Low cut OFF.
Set the low cut at 120hz and the high cut somewhere between 5000 and 7000 hz. Then try again
-
I shared the exact profile i used to record those 3 samples from 3 different guitars maybe you could download it and record a profile with that one
EDIT: record a SAMPLE not a profile.
cool, refresh my memory, which profile was it? I’ll do it now
-
https://www.dropbox.com/scl/fo/exzdv9t…cvzip268sf2xtlr
Should be labelled. done via spdif and I used one of my own for comparison
-
https://www.dropbox.com/scl/fo/exzdv9t…cvzip268sf2xtlr
Should be labelled. done via spdif and I used one of my own for comparison
First one is perfect to me, the second is also not fizzing
-
First one is perfect to me, the second is also not fizzing
can i hear a recording? if i hear it in your recording then it must be my ears are shot
-
With a title like.
"Gave up! My Kemper is going."
I see 6 pages of people helping out. I doubt anyone would get this kind of love anywhere else. Makes me humble to see this kind of empathy. Should change the title to: "Look how awesome Kemper users are"
-
is this a commercial PROFILE?
-
-
I think trying Kellerblues suggestion with the High Cut filter might really help from what I can hear in tour samples, running mine between 5,500hz and 6,500hz helped with pa speakers and with the Kone on eliviating some high end fizz and keeping Pure Cabinet on a little at about 1.5-1.8 also seemed to help in conjunction with the High Cut filter. I played with the Low Cut filter between 75hz-110hz until I found a sweet spot where it filled out the tone without being boomy.