Here is how to have one pedal for Wah, Pitch, and Whammy (from the Reference Manual). From reading this, though, the volume pedal cannot be active in a rig with active whammy or pitch. So, you will either need to use a second pedal, just for volume, or more than five rigs.
Quote:
If you do not want to bring three pedals to a gig, but would still like to benefit from all these features, you can link the pedal nodes to suit your setup. You will find two simple soft buttons in the System Menu on the page “MIDI Settings’.
If you don’t use a volume pedal very often, press “Volume Pedal to Wah”. Now, when a Wah effect is active on the current rig, the wah pedal will act as expected, and a volume pedal function will not be available.
However, in any rig without an active Wah effect, volume can now be controlled by the wah pedal. Even when a Wah effect is active, but has Pedal Mode set to “Off” or “Touch”, the volume pedal link will still be in operation.
The PROFILER automatically prevents volume dips when switching from a “Wah pedal” rig to a “Volume pedal” rig, so you will need to reset the pedal after the rig change by first pressing it to toe position. Once you have done this, you will be able to smoothly fade the volume back to where you want it.
Likewise, you can link the pitch pedal to the wah effects by selecting “Pitch Pedal to Wah”. In contrast to the volume pedal, you must first reset the pitch pedal by pressing it to heel position after a rig change.
The link settings are global, so you don’t have to reprogram your rigs individually. You can decide spontaneously, from gig to gig, how many pedals you want to bring with you. The appropriate settings are done in seconds.
It is even possible to link both pedals to the wah pedal. In this case, the volume pedal has the lowest priority: active wah or pitch pedal beats the volume pedal.
Note: once the Volume pedal or Pitch pedal is linked to the wah pedal, they cannot be accessed by their respective midi controllers or pedal input destinations.
Note: we do not support the swapping of pedal functions by switching a Wah effect on and off, as this would cause problems.
Besides, you’ll get a better result by selecting one of our dedicated pedal modes that automatically activate the Wah effect as soon as you move the wah pedal.
END QUOTE
So, they DON'T support swapping Wah/Pitch/Volume function by pressing switches. But, setting the wah to automatically come on when you move the pedal IS supported.