Adding all the settings collected so far to the first post would be a start (hint hint @DonPetersen)
need help setting up your Wah in the Profiler? do you own a rare Wah? let me know.
-
-
Adding all the settings collected so far to the first post would be a start (hint hint @DonPetersen)
Agreed. Making somebody read 5 pages of posts to get to the 5-10 posts with actual settings is silly. -
Went through the thread and collected all I saw. (see below)
GCB95 modded with Red Fasel inductor
Manual 4.1
Peak 8.1
Pedal Range +25%
Peak Range -41%
Mix 95%
GCB95 modded with Whipple inductor
Manual 3.6
Peak 7.4
Pedal Range +25%
Peak Range -37%
Mix 94%
535Q (Option I)
Manual 3.6Peak 6.9
Pedal range +24
Peak range -22
Bypass to stop
Mix 94%
Duck 0.0
Volume 0.7
535Q (Option II)
Manual 3.6Peak 7.4
Pedal range +25
Peak range -37
Bypass to stop
Mix 100%
Duck 0.0
Volume 1.0
Jerry Garcia (Option I)
Manual: 0.6Peak: 8.6
Pedal Range: +50%
Peak Range: -8%
Pedal Mode: Touch
Mix: 100%
Ducking: <0.0>
Touch Attack: 5.0
Touch Release: 0.5
Touch Boost: 0.8
Volume: +0.5
Jerry Garcia (Option II)
Manual 0,6Peak 7,3
Pedal Range +66%
Peak Range -18%
Pedal Mode Touch
Stereo 0.0
Mix 100%
Ducking 0.0
Touch Attack 5.0
Touch Release 1.7
Touch Boost 4.4.
Volume + 0.5
BW
Manual: 9.5
Peak: 9.2
Pedal Range: -79%
Peak Range: -77%
Pedal Mode: Touch
Mix: 100%
Ducking: <0.0>
Touch Attack: 2.0
Touch Release: 0.5
Touch Boost: 0.8
Volume: +0.5
Dunlop JH-1 (revisited with the info from the manual)
Manual: 3.1
Peak: 7.9
Pedal range: +29%
Peak Range: -28%
Mix: 84%
CAE MC404
Manual: 3.7Peak: 8.6
Pedal range: +30%
Peak Range: -49%
Mix: 95%
Trower Like Songs
Manual: 3.1Peak: 7.5
Range: +20%
Peak: -22%
Mix: 94%
Vol: +0.7
-
Thank you and well done, SanctumSolaris!
------------------------------------
Kemper Wah-settings List
------------------------------------ -
Thank you SanctumSolaris! Much appreciated!
-
Thanks for your work
-
Plus one to all the help and posts helping newbeez, this could be the ULTIMATE beginners thread for WAH
Thumbs up on all of them..I have more clicking to do
Thanks so much allAsh
-
Thanks for the work SanctumSolaris !
-
Thanks for your work
I really like preset "Jerry Garcia Option II"
-
Thanks for your work
I really like preset "Jerry Garcia Option II"
I think that one is from @Nick58
-
Hi,
Thanks for tips i try that.
-
Does anyone have a recommended setting for moderately high gain lead tones? As much as I HATE to use this example, Kirk Hammett type of lead tones? I know he's always been a Crybaby rack guy. But even in the past with my Crybaby, it seems like any time I use my wah on the high E and B strings, around 14th fret and up, the effect is practically gone.
I understand that becomes more normal the higher up you go and the more gain you have, and adding in mids to the EQ will help a little. So I'm just looking for what you all have found to do the best job in that register.
-
See what I just got my hands on... Woohoo!
I'll run the white noise through it and send it to Don.
-
Sorry for the dumb question... How do I send the white noise to a wah and record the result?
I forgot to reply to this. I use one of these:
-
thx Dahla.
I don't want to buy new gear just to do that.
I've tried doing it with my current gear (audio interface), but I'm getting bad clipping. Maybe feedback loop, not sure.
My chain:
DAW white noise --> sound interface OUTPUT --> wah input --> wha output --> sound interface INPUT --> DAW recording of various wah positions -
make sure you don't route your audio input to the output (this will create a feedback loop / clipping)
which recording software are you using? -
I'm using Logic Pro X. with an Apogee Duet 2 audio interface.
-
I'm using Logic Pro X. with an Apogee Duet 2 audio interface.
in the mixer view of logic, what is the output of the channel you're recording the wah with set to?
-
Output 3 mono (headphones output on my duet is 3 and 4).
-
Far out. Cannot wait to get that Cantrell Wah setting. Been waiting a long time.
Thanks dahla
-