Posts by lk_bill

I just tried a usb transmit cable (Apple UsbC cable) and I'm having the same issue.

Quote from Burkhard

Does your USB cable support data transmission or it just a charging cable?

Standard charging cable.

Replying to all (and thank you):

Q:"Each slot needs its own specific setting"
Slot 1 has PC (to trigger UaFx pedal to switch to Preset 1) (see next Question)

Slot 2 has PC (to trigger UaFx pedal to switch to Preset 2) (see next Question)

Q:"How are you setting midi?"

Plugging usb cable from Kemper Usb-A to UaFx pedal Usb-C

Kemper System->Select Midi Port=Midi Out
Midi Device A -> Channel 2 (I have set one of my uafx pedal to channel 2)

Performance Slot 1 -> Slot Settings -> Midi Settings:
Midi Device A = PrgChg
Midi Message =1 (preset PC 0 on the uafx pedal)

Performance Slot 2 -> Slot Settings -> Midi Settings:
Midi Device A = PrgChg
Midi Message =2 (preset PC 1 on the uafx pedal)

Q:"Have you set the patch number on the Kemper"

I did (see above)

Q:"and populated the PC list in to the UAFX? Right after the update it's empty"
Indeed. I added 2 presets, one in PC 0, the second one in PC 1.

Hi,

I’m having issues trying to control Program Changes on my uafx amp pedals, connected to my toaster via the Kemper fx loop. My goal is to have one uafx preset in each of the five performance slots, and be able to switch amp sounds by simply switching slots with my Kemper remote.

I’m using a usb-A to usb-C cable, plugged respectively to the usb-A port on the toaster (midi host) to the usb-C port on one of my UaFx amp pedals (Ruby).

I’m in performance mode on the Kemper.
I set the midi to midi-out, and chose the desired device channel and program change number to control a preset change.

Nothing happens when I switch performance slots, not sure what I’m doing wrong.

Any help would be appreciated.

Cheers.

Would be great to see a black tolex Kabinet to match the new colour.

Quote from jaeger 28

The second one is always a bit clearer and more hifi, the first one smears and is thicker. I prefer the first a bit.

So which is which?

The first one is the AT Halo pedal, the second one the Kemper Delay.

Hey Foxbilder, I have recreated the AndyTimmons Halo delay a while back, using the Halo pedal as reference.
I've copied 2 of the pedal presets that I liked the most, and added them to a single Kemper delay preset, using a morph to go from one setting to the other one.
It's using Tempo Sync, and the mix is quite high (80%), but you can either lower it to taste or control it with an expression pedal.
Have a listen, I'm playing Halo and Kemper delay in sequence, can you guess which one is which?

• November 20, 2024
• Official Post
• #1

PROFILER Operating System 12.0.2.56077 includes the following change:

User Interface

changed: Looper default 1/2 speed with 60 seconds recording time

Quote from Philter187

How do I use the Kemper as audio interface? Setting it as input and output device on windows does not work

I'm on Mac, but I'm sure you can find the how to here:

If you have your Kemper connected to your laptop via usb and use the Kemper as audio interface, you should hear Spotify (or any other audio) in your headphones connected to your Kemper.
This is also true if you have your Kemper connected to your Scarlett via Spdif (with headphones connected to your Scarlett).

Dear Kemper friends,

This is with great pleasure that I've prepared for you a brand new Profiles Pack, based on the Universal Audio Lion Pedal.

This is showcasing 3 classic Marshall vintage amplifiers: a Superbass, a Superlead, and a variac’ed Superlead.

You can purchase the pack for the price of a coffee by going to my ko-fi shop:

Lion pack (for all Kempers, including Player):

https://ko-fi.com/s/2fecd8e4cb

20 Factory Profiles
20 Artists Profiles
16 Custom Profiles
21 Liquid Profiles

You can listen to clips in the shop pages directly, or below:

Reviving this old thread, probably not a priority for the Kemper team, but would be a nice addition to be able to save loops into a usb drive plugged in the back of the Kemper and also maybe use the storage capacity of usb drives to have longer loops duration.

Planen Sie, ein Kemper-Video zu erstellen, in dem die USB-Midi-Funktionalität (mit Programmwechsel) ausführlich erklärt wird? Diese YouTube-Videos sind alle sehr gut erklärt und super nützlich. (google translate use, sorry for any mistake).

Fantastic! So easy!

Thx Wheresthedug !!

Is it possible to save a preset directly from RigManager? I can save say a custom reverb preset from my Toaster with the soft "store" button, but I can't find the same functionality inside Rig manager.

Dear Kemper friends,

I have updated my packs with some Liquid profiles goodness.

The Ruby pack now contains 12 additional Liquid profiles, with Top Boost amp & non-Top Boost amp, along with 6 speakers/cab configuration.

The Dream pack now contains 6 additional Liquid profiles with 6 speakers/cab configuration.

You can download the packs here:

Ruby Pack

https://ko-fi.com/s/c8d50548e5

15 Factory Profiles

27 Artists Profiles

16 Custom Profiles

12 Liquid Profiles

Dream Pack:

https://ko-fi.com/s/d919c58843

20 Factory Profiles

35 Artists Profiles

16 Custom Profiles

6 Liquid Profiles

Customers who bought the packs previously will receive a free upgrade.

Enjoy!

Sollazzon , I'd like to retrofit an old profile I did a few years back. I still have the gain and EQ values on a piece of paper. What's the exact procedure?

The addendum says:
"enter the amp settings of the PROFILE and press all three Restore buttons once".

When I press the restore buttons, nothing happens.

I'm a bit lost.

EDIT:

I think I figured it out (maybe):

I pressed all three soft buttons (Restore Gain, Restore Amp Model, Restore EQ)
I then selected the desired amp model (Fan Twins Reverb Normal in my case)

I set the Gain Pot Ref to the value when profiled

I set the EQ settings to the value when profiled

I finally long pressed on "Burn"

I compared this rig to my original profile, the sound is identical, which is what I expected, and now when I increase the gain the profile reacts as a real Twin would do, which is good news I suppose.
My original profile would saturate way too much if I set the gain to max. The new Liquified profile is closer to the real Twin cranked up (still very clean).

Quote from almcmanus

Can't seem to get it to work. Profiler as driver selected. Master LR selected on output section of KPA... no joy for some reason? Is there a Mac/Logic tutorial out there somewhere? Thanks!

almcmanus have you tried going into Logic settings/Audio and selecting the Profiler as audio source?

Quote from semguigui

wow !!

They still prefer making happier already happy guitarists than selling them newer units (even the owners of the oldest units!!). Very impressive nowadays 👏. And good for the planet...

Do you think USB audio will be also for toasters?

semguigui yes, usb audio will be for all units.

.