Anybody knows what are the improvements to the combo switches?
Any new problems with the new beta?
the problem was that if I had combo 1+2 för bank down and combo 2+3 for bank up, morphing didn't work as expected on FS2. That problem is now solved
...haven't noticed any other problems so far
all the fx blocks in browser mode still blacked out
i'm currently awaiting for my player to upgrade from v 11.0.0 to the latest v11.1.2 beta.
Insert USB stick, hold down two buttons then power up....
FX1, FX2 and the bank button have been flashing yellow for ten minutes now. What should i do?
i'm currently awaiting for my player to upgrade from v 11.0.0 to the latest v11.1.2 beta.
Insert USB stick, hold down two buttons then power up....
FX1, FX2 and the bank button have been flashing yellow for ten minutes now. What should i do?
Remove midi from KPP. It helped me!
the problem was that if I had combo 1+2 för bank down and combo 2+3 for bank up, morphing didn't work as expected on FS2. That problem is now solved
Great to hear that, had also the problem on FS2 with morphing (always on). So lets start the firmwareupdate... 
Remove midi from KPP. It helped me!
i have no midi engaged as the USB stick is using that slot
Attempting to change the effects type using NRPN causes the player to crash with a horrible buzzing sound on the audio outs. Deffo a gig killer!!
Have submitted a ticket about this
Just updated to 11.1.2 and still cannot backup via USB
Where can we get hold of v 11.0.0 that was my last reliable FW that fixed a couple of issues (notably Ducking and Mix in Chorus at PROFILER Player) over the 10.9.3 official release
On the previous one my unit didn’t go to the next bank when you pressed “next rig” on slot 5.
The only issue I have left is that lvl 2/3 efx and the extra banks, don’t show up in iOS rm.
I have a level 3 Player, USB backup is either only backing up the first 50 rigs, or rig manager only displays the first 50 when you open a backup file on the computer.
Is anyone else getting the same issue ?
I have updated my Player Level 2/3 to 11.1.2 but nothing has changed… through iPhone or iPad app still Level 1… basic FX ecc.. :(((
If I load any kind of not Level 1 FXs it loads it as Green Screamer..
I have updated my Player Level 2/3 to 11.1.2 but nothing has changed… through iPhone or iPad app still Level 1… basic FX ecc.. :(((
If I load any kind of not Level 1 FXs it loads it as Green Screamer..
This is working properly for me and many others. There must be something specific to your setup that is causing this. You should raise a ticket with support and get them to investigate it with you.
This is working properly for me and many others. There must be something specific to your setup that is causing this. You should raise a ticket with support and get them to investigate it with you.
I did… waiting for their answer… are you using iOS App?
I did… waiting for their answer… are you using iOS App?
Yes.
I have updated my Player Level 2/3 to 11.1.2 but nothing has changed… through iPhone or iPad app still Level 1… basic FX ecc.. :(((
If I load any kind of not Level 1 FXs it loads it as Green Screamer..
I have the same..the hardware has updated, which shows fine on a rig manager on a desktop.
However…on iOS rig manager…it doesn’t.
I have updated my Player Level 2/3 to 11.1.2 but nothing has changed… through iPhone or iPad app still Level 1… basic FX ecc.. :(((
If I load any kind of not Level 1 FXs it loads it as Green Screamer..
I have the same..the hardware has updated, which shows fine on a rig manager on a desktop.
However…on iOS rig manager…it doesn’t.
My apologies, you guys are correct. It appeared to be working fine for me but that was just a coincidence due to the fact that the only effects I was using are part of Level 1. I have now retested and get the same as both of you - none of the Level 2/3 effects are available on the iPad RM app even though they are available in the Player itself. That is clearly a bug so I am sure Kemper will get it sorted very quickly now that they know about it
Same problem for me, on 11.1.2 and latest app version on both Android en iOS. Strange thing is that it did work for me the first time though, when I activated the level III. But it stopped working after the next restart.
I don't know if it is related to the problem, but I did change both my Profile Player name and number of banks in the settings in my "first" run of the new version, when everything was still working correctly. And I think I changed these settings in the PC Rig Manager (which was also connected), so not in the app.
Any of you guys did the same (changing profiler name and/or number of banks in the PC rig manager on first activation?).
Are there any improvements or changes for the full profiler in this beta version? If not, I’d rather not update. Thx
