I know Im a bit new to the Kab but I have tried many things from the forum etc but I still get a tinny sound. Is there perhaps some instructions for complete idiots ??
Thank you
Kabinet sounds like Im playing in a tin can
-
Lindsay -
October 7, 2023 at 6:27 PM -
Thread is marked as Resolved.
-
Are you hooking it up using a speaker cable (when using a powered Kemper)? Do you have the Cabinet ON and using an Imprint?
-
Monitor out? Imprint on in cab section?
-
Are you hooking it up using a speaker cable (when using a powered Kemper)? Do you have the Cabinet ON and using an Imprint?
Hi . Sorry if it seems like a late reply but we live in Cape Town so possibly a time difference. I am using a Stage Kemper hooked up to the Kabinet with a standard speaker cable ( if thats what you mean ?). ...... I use the Rig Manage mainly ( easier on my brain I guess
but on the Stage itself it says in the output section that the monitor cab is off. I have set the Cabinet in Rig Manager to Full Range Mode ( I saw someone suggested that ) . On the Kemper Stage itself , I have the Kemper Kone activated it apperas and half of it to the right of Amp Boost is greyed out . Its wonderful that you guys are there to help me. Much appreciated . Thank you. -
Hi . Sorry if it seems like a late reply but we live in Cape Town so possibly a time difference. I am using a Stage Kemper hooked up to the Kabinet with a standard speaker cable ( if thats what you mean ?). ...... I use the Rig Manage mainly ( easier on my brain I guess
but on the Stage itself it says in the output section that the monitor cab is off. I have set the Cabinet in Rig Manager to Full Range Mode ( I saw someone suggested that ) . On the Kemper Stage itself , I have the Kemper Kone activated it apperas and half of it to the right of Amp Boost is greyed out . Its wonderful that you guys are there to help me. Much appreciated . Thank you.Aha... The Stage has no powered speaker output. I'm guessing you are using a non powered Kab, and no amplifier in between the Stage and speaker?
If so, you'll need a class D amp between the Monitor out and the Kab, or trade the Kab for a powered Kab.
Either solution will bring glorious tone!
-
You need to use a normal cable, not a speaker one, but most important: you do have a powered Kabinet, right? Not the passive one...
-
You need to use a normal cable, not a speaker one, but most important: you do have a powered Kabinet, right? Not the passive one...
Thanks. Sorry I meant I used a normal guitar cable. No idea what a speaker cable is actually
- Yes I ado have the powered Kabinet. Thanks -
if you use the fullrange mode the monitor cab should be on...use the imprints with monitor cab off
-
As luntho wrote .... you are listening to the amp without any speaker/cab simulation ... i.e. sound in a tin can
just turn the monitor cab on & all's well again ... -
As luntho wrote .... you are listening to the amp without any speaker/cab simulation ... i.e. sound in a tin can
just turn the monitor cab on & all's well again ...Thank you Wolf and Luntho....... That has improved the sound a lot. Many thanks
