So what does MIDI OUT actually, um... output??

mbenigni · January 8, 2015 at 6:43 PM

Quote

Seems like this is a reasonable expectation. Boy, clock would be so nice, though.

As would CC7 for volume, CC1 for wah, CC4 for pitch, and so on...

somedaygone · January 9, 2015 at 5:05 AM

Here's some of the talking you can expect from the KPA over MIDI Out (from the MIDI Spec):

With firmware 2.3.0, the profiler, if in performance mode, will send back the current performance number via CC47 and the appropriate slot selection.

The function code $41 can be used to request a single numeric value for an NRPN parameter. The requested value is being send back with function code $01.
The function code $42 can be used to request a number of numeric values for an NRPN parameter block. The requested value is being send back with function code $02. You might notice that there is no size attribute defined. The response does cover all parameter of the requested unit. Expect up to 128 values.
The function code $43 can be used to request a textual value for a string parameter. The requested text value is being send back with function code $03.
The function code $47 can be used to request a textual value for a string parameter. The requested text value is being send back with function code $07 or $035. The controller number is being encoded with 5 bytes (instead of 2). Encoding can be found on Page 13.
Function code $7C is a bit special, it allows to retrieve the string representation for a specific value of a parameter. Caution: This function can be expensive regarding CPU time.

whippinpost91850 · January 10, 2015 at 4:25 AM

I just want to be able to contoll other gear like my GR55 as well as the KPA

paults · January 26, 2015 at 2:32 AM

A thread Update (from The Remote page)

ADMINISTER OTHER EQUIPMENT
Remote allows you to control external MIDI gear by sending program change messages utilizing the MIDI output of your Profiler.

mbenigni · January 26, 2015 at 5:15 PM

PC is good, but if it won't also send - at minimum - CC7 for the pedal assigned to volume, then I can't use it. I'm hoping f/w 3.0 adds this to both the Profiler Remote expression pedal inputs, and the expression pedal inputs on the KPA itself.

drbill · January 26, 2015 at 5:54 PM

PC is the barest minimum to be useful; CC & clock are needed, too, please.

whippinpost91850 · January 26, 2015 at 9:00 PM

+1+1+1+1+1+1+1+1+1+1+1

somedaygone · January 28, 2015 at 5:19 AM

I'm setting up a program to listen to MIDI out. The KPA sends out FE 00 00 active sensing messages about 3 per second. Have to filter that out to hear the other things it says in response to NRPN commands. So yeah, MIDI out definitely works.