QuoteSeems like this is a reasonable expectation. Boy, clock would be so nice, though.
As would CC7 for volume, CC1 for wah, CC4 for pitch, and so on...
QuoteSeems like this is a reasonable expectation. Boy, clock would be so nice, though.
As would CC7 for volume, CC1 for wah, CC4 for pitch, and so on...
Here's some of the talking you can expect from the KPA over MIDI Out (from the MIDI Spec):
With firmware 2.3.0, the profiler, if in performance mode, will send back the current performance number via CC47 and the appropriate slot selection.
The function code $41 can be used to request a single numeric value for an NRPN parameter. The requested value is being send back with function code $01.
The function code $42 can be used to request a number of numeric values for an NRPN parameter block. The requested value is being send back with function code $02. You might notice that there is no size attribute defined. The response does cover all parameter of the requested unit. Expect up to 128 values.
The function code $43 can be used to request a textual value for a string parameter. The requested text value is being send back with function code $03.
The function code $47 can be used to request a textual value for a string parameter. The requested text value is being send back with function code $07 or $035. The controller number is being encoded with 5 bytes (instead of 2). Encoding can be found on Page 13.
Function code $7C is a bit special, it allows to retrieve the string representation for a specific value of a parameter. Caution: This function can be expensive regarding CPU time.
I just want to be able to contoll other gear like my GR55 as well as the KPA
A thread Update (from The Remote page)
ADMINISTER OTHER EQUIPMENT
Remote allows you to control external MIDI gear by sending program change messages utilizing the MIDI output of your Profiler.
PC is good, but if it won't also send - at minimum - CC7 for the pedal assigned to volume, then I can't use it. I'm hoping f/w 3.0 adds this to both the Profiler Remote expression pedal inputs, and the expression pedal inputs on the KPA itself.
PC is the barest minimum to be useful; CC & clock are needed, too, please.
+1+1+1+1+1+1+1+1+1+1+1
I'm setting up a program to listen to MIDI out. The KPA sends out FE 00 00 active sensing messages about 3 per second. Have to filter that out to hear the other things it says in response to NRPN commands. So yeah, MIDI out definitely works.