I know the instructions are in the manual but I cant get it to work.
My setup is a UR44 and Cubase 11.
I have the input set as mono 1 (UR44 input1) and fed from Direct Output on the KPA
The output for the track on Cubase I have set to output 3 (UR44 mix2L) and connected line out 3 to Return input on the KPA.
This is what I get when trying to profile:
These are my KPA out settings:
I'm missing something here, anyone have an answer?
Thanks
I believe your issue is because you are supposed to use the SEND/RETURN connections on the Kemper. Not the OUTPUTs.
are the profiling tones audible / do they reach the input/plugin?
is signal going through the plugin - in some sequencers you have to set a track a certain way for live input signals (IN in Live for example)
Isn't Direct Output the Send?
Hi Don,
Just to clarify. I'm trying to match a guitar sound from a previous track for which I don't have the original patch anymore.
I've recorded a similar part, added a vst amp as an insert and tone matched it using Ozone also as an insert.
That track is then sent to mono 3 which is Line out 3 on the UR44 (UR44 mix2L) and connected to the KPA Return Input.
I then send the Direct out/Send to input 1 of the UR44.
Thing is, when I play the part on Cubase there is no input light flashing on the KPA which I presume is what would happen.
you cannot send a prerecorded track to the Profiler for profiling. You need to send the profiling signal into the channel in your DAW that has the plug-ins inserted that you want to profile and route the output of that channel back to the return input of the Profiler.
I understand I cant send the pre recorded track.
I am trying to send the plug ins I used to copy the sound of the track (amp vst and tone match info) in to the KPA for profiling.
That track is then sent to mono 3 which is Line out 3 on the UR44 (UR44 mix2L) and connected to the KPA Return Input.
I then send the Direct out/Send to input 1 of the UR44.
Thing is, when I play the part on Cubase there is no input light flashing on the KPA which I presume is what would happen.
which seems to indicate that something is amiss in the output settings of the soundcard,
can you hear the test tones through the amp sim?
Hi Don,
If I switch the track strip to Monitor, I can hear the profiling tones.
Don, got it to work, the main culprits being the routing of the UR44 outs (and their naming convention) and my brain
Thanks for the help!
