Using Rig Manager in Performance mode

struna · March 8, 2015 at 7:42 PM

Hello!

Is there any other than the manual way on the KPA to manage Slots in performance mode? It would be great to manage it over RM... Does anybody know if there is a development in this direction in the near future? Fractal is much better in this subject also for tweaking and managing rigs...

Euji · March 8, 2015 at 8:01 PM

+1

Ingolf · March 8, 2015 at 8:27 PM

Future RIgManager versions will be able to manage performances.
There was a prototype shown at NAMM.

struna · March 8, 2015 at 8:43 PM

Great! Hope it will be available soon! Is there any more data/video about new RM?

Raoul23 · March 8, 2015 at 10:01 PM

Ingolf is right at NAMM they were showing a future version of RM which will allow performance management

paults · March 8, 2015 at 10:18 PM

You can Import a Rig Manager rig directly into a Performance slot now:

1) Put the KPA in Performance Mode.
2) Select a Performance slot active with the KPA left/right Rig buttons, a MIDI controller, or the Remote.
3) In Rig Manager, select a Rig. You can doubleclick *or* you can highlight the Rig and hit Enter.
4) The Rig has been temporarily loaded into that Performance slot.
5) STORE the Performance to make the change permanent.

Done

rdwilson · March 24, 2015 at 4:58 AM

[quote='paults','http://www.kemper-amps.com/forum/index.php/Thread/19253-Using-Rig-Manager-in-Performance-mode/?postID=210393&#post210393']You can Import a Rig Manager rig directly into a Performance slot now:

1) Put the KPA in Performance Mode.
2) Select a Performance slot active with the KPA left/right Rig buttons, a MIDI controller, or the Remote.
3) In Rig Manager, select a Rig. You can doubleclick *or* you can highlight the Rig and hit Enter.
4) The Rig has been temporarily loaded into that Performance slot.
5) STORE the Performance to make the change permanent.

Done :)[/quote]............thanks for this info Paults

struna · March 26, 2015 at 8:55 AM

Tnx paults... I know this "work arround"... was thinking to have a more advanced Rig manager... with the word manager I am referring to manage not to list selection as it is now in the app... hope we will se soon this handy upgrade of the application.

EL34 · July 8, 2015 at 6:40 PM

Quote

Future RigManager versions will be able to manage performances.
There was a prototype shown at NAMM.

Any more news/info on the RM version shown at NAMM?

little_harry · July 8, 2015 at 8:54 PM

Quote from EL34

Any more news/info on the RM version shown at NAMM?

Yeah!! Where is it!?!?!

I just throw away 30 minutes of my life sorting and managing my performances. Performance mode and several bands with different setlists is a pain on the Kemper.

grotius · May 1, 2017 at 5:27 PM

Quote from paults

5) STORE the Performance to make the change permanent.

Maybe a bit of a noob question but how do you "store" the changes then? Like changing the parameters and then press the STORE button? I tried that and my slots disappeared.

paults · May 1, 2017 at 6:13 PM

1. Press the STORE button on the KPA

2. Select the Destination (the default is to store in the current Performance location)

3. Press STORE again. You have the option to change the name of the Performance, if you want to.

4. Press STORE one more time.

Done

fourstrk · May 2, 2017 at 5:03 PM

It's still very buggy on MacOS when it comes to reordering slots. It simply is not in sync ... even after a restart.

G String · May 2, 2017 at 5:47 PM

Quote from fourstrk

It's still very buggy on MacOS when it comes to reordering slots. It simply is not in sync ... even after a restart.

are you using OS 5.2?

fourstrk · May 2, 2017 at 11:14 PM

Everything is up to date. I'm creating a new set list in performance mode at the moment and I'm really struggling with Rig Manager ... so I have to do it on the device or I have to do most of the work twice ...

G String · May 3, 2017 at 9:35 AM

this is not what we see here, your issues might be USB related. please contact support by email.

fourstrk · May 3, 2017 at 1:20 PM

I get the error when the Profiler is in Performance Mode. If the Profiler is in Browse Mode while editing Slots in Rig Manager everything works as it should. I use Copy / Paste on the Mac, maybe this causes some confusion.

Today one slot I dialed in (and I saved in the Profiler) was overwritten with some other rig ...

G String · May 3, 2017 at 1:29 PM

Quote from fourstrk

I get the error when the Profiler is in Performance Mode. If the Profiler is in Browse Mode while editing Slots in Rig Manager everything works as it should. I use Copy / Paste on the Mac, maybe this causes some confusion.

Today one slot I dialed in (and I saved in the Profiler) was overwritten with some other rig ...

i doubt that this happens just like that, not with the latest update. please contact support by email.

fourstrk · May 3, 2017 at 5:23 PM

Quote from G String

i doubt that this happens just like that, not with the latest update. please contact support by email.

In happens only when RM and KPA are used simultaneously. If RM is only used for renaming and not for reordering it syncs. I will contact support if I am able to reproduce the problem. The software is definitely up to date. I checked this after your hint.