Hi,
been searching the forum for a way to change rotary speed with an expression pedal connected to the remote...
any ideas ?
thanks
![](https://forum.kemper-amps.com/wbb/images/avatars/7c/26-7c8f91ea953504fd6b34fba77a981055601d33da.gif)
Rotary speed with the Remote ?
-
reznor -
February 28, 2015 at 11:53 AM -
Thread is marked as Resolved.
-
-
How about searching the manual?
-
the only thing i find in the manual is the midiCC number 33 to assign for rotary speed...
how do i assign thst CC number when there's no midi assignments for the expression pedal with the remote ? -
Hi,
been searching the forum for a way to change rotary speed with an expression pedal connected to the remote...
any ideas ?
thanksThe Factory 3.0 version of "CK Rotary Speaker" has the Rotation Speed parameter auto-assigned to Remote Button IIII
-
problem is, i want to control the rotary speed with an expression pedal connected to the remote.
But i don't know how to assign the expression pedal to the control change 33 which controls the speed of the rotary.
Can't find any information on that in the manual... -
Understood. An expression pedal would act just like a switch, though:
The Rotary Speed parameter has two settings: fast and slow (like a real leslie). If you used an expression pedal, it wouldn't give you a continuous control over the speed.
The MIDI manual doesn't apply to the Remote(yet?). I hope the Remote pedals and switches will eventually be able to control any parameter that we want to control
-
that's exactly what i want to do, though the expression pedal is acting like a switch it gives you a good feel for the rotary going faster an slower...
but i can't even find a way to control rotary speed with a remote button,
any suggestions other than reading the manual, what i've already done...
-
Maybe, when the switch functions are added to the Remote, you can assign a Switch function to a connected pedal.
-
i would already be happy to make it work with a remote button, i have a gig tonight and i'd like to use the remote...
all set up except that f.....g rotary speed !
-
Look at the 3.0 CK Rotary - if nothing else, copy everything else in from your rig, and use the pedal assignment in that rig
-
i'm going to try this, thanks
too bad nobody of the Kemper team can give me a hint except "read the manual"
*the times they are changing" -
You're welcome
-
I figured it out! The manual implies how The Remote "learns" switch assignments - it occurred to me what that must mean for Rotary Speed.
Go to a rig with a Rotary Speaker effect (or add one as an experiment).
Press the MOD button, so you can see the first page of Rotary speaker parameters.
Press a Remote switch, holding it down.
Press the Soft Button above "Rotation Speed".
You will see the Remote Display has been updated to show the assignment.
Push the Remote Switch - the rotary will change speed.
SAVE your rig with the Speed you want when the rig is activated.
-
now that's what i couldn't find in the manual, can you tell me on what page in the manual you found the solution ?
i defintely owe you one
-
now that's what i couldn't find in the manual, can you tell me on what page in the manual you found the solution ?
The manual didn't specifically say HOW to do it. I just said to myself "If I programmed the slots to work that way, how would I program the rotary Speed switch to work?" As it turns out, I was right
EDIT: This the mention from the 3.0 version of the Reference Manual - I just found it on page 108:
Besides toggling the status of stomps and effects, each of the Effect buttons can also be used to trigger so-called "Action & Freeze" functions. Currently, there is one of these functions available: "Rotary Speaker (slow/fast)". We have many more under development.
-
Paul, I assume you have allready received your remote ????
-
Ohio is ever so slightly closer to Colorado than Michigan
Are you one of the Monday deliveries? (There are too many of those remote threads to keep it all straight....)
-
Nope mine is to ship on the 23rd
-
I figured it out! The manual implies how The Remote "learns" switch assignments - it occurred to me what that must mean for Rotary Speed.
Go to a rig with a Rotary Speaker effect (or add one as an experiment).
Press the MOD button, so you can see the first page of Rotary speaker parameters.
Press a Remote switch, holding it down.
Press the Soft Button above "Rotation Speed".
You will see the Remote Display has been updated to show the assignment.
Push the Remote Switch - the rotary will change speed.
SAVE your rig with the Speed you want when the rig is activated.
But how is itpossible, to use f.e. a performance-slot without rotary, then push a effect-button on the remote to activate the rotary effect and then push another effect-button to change speed. (this is the usual way for a guitarist to activate a leslie and the change speed). I don't see how that can be realized in the present configuration (and it is not described in the manual).
-
[
But how is itpossible, to use f.e. a performance-slot without rotary, then push a effect-button on the remote to activate the rotary effect and then push another effect-button to change speed. (this is the usual way for a guitarist to activate a leslie and the change speed). I don't see how that can be realized in the present configuration (and it is not described in the manual).Easy.
1. Assign one of the switches I-IIII to the rotary on/off
2. Assign another one to slow/fast
by following the usual procedure pressing the swich on the remote and the switch on the profiler simultaneously. -