Similar to the fast-slow status of the rotary I'd like to have an x>>y setting with customizable FX status and make this midi switchable.
X >> Y setting with customizable FX status
-
-
This could also be used to create a solo Sound x Setting is rythm and y has more gain, more loudness, delay and stuff (without having to use a second patch).
+1
-
This could also be used to create a solo Sound x Setting is rythm and y has more gain, more loudness, delay and stuff (without having to use a second patch).
+1
Yes, exactly. And make it switchable per rig.
-
To be more precise, it would be great to be able to freely define what parameter is used for x and y switching.
Say chorus speed or chorus depth, delay speed or delay repeats, or delay mix. -
+1
This also could be assignable to I - IV on The Remote.
-
Sounds like a cool request. +1
-
To be honest the old Line 6 pedal devices like the DL4 had a similar feature which could be used by pedal.
You dialed in one setting with the pedal at heel position, changed the setting and moved the pedal to toe and voila, now you could morph through the settings. You could also control several settings at once with this feature.
I spoke with CK about this at the Musikmesse 2013 and he actually had a similar idea IIRC.So let's have some more likes here.
-
I remember a video of someone demoing the axe-fx ultra. And he programed something like this on a button of his midi controller.
At the end of the solo he would hit the button, then having more delay and stuff, then changing presets to his rhythm tone and have
the last solo note delay over him already playing rhythm again.It's a good thing when you're the only guitarist in a band.
-
Yes, the Axe-Fx 2 has a similar feature.
-
+1 also, to Pedal assignment of multiple parameters at the same time.
-
-
-
-
To be honest the old Line 6 pedal devices like the DL4 had a similar feature which could be used by pedal.
You dialed in one setting with the pedal at heel position, changed the setting and moved the pedal to toe and voila, now you could morph through…
Yep, this is how DigiTech does it too and is directly tied to my assignable expression pedal feature request. -
Very good idea
-
This should be possible already, but I think there will need to be additional parameters included in each FX to make it happen.
As per the Remote webpage:
The four TRS connectors on the rear panel can be used for continuous controllers and switches. Each controller can be freely assigned per program. Multiple assignments per controller are also possible.So if you set one FX to be at max at heel and another at toe, this would work. But for this to happen, you need a place to determine that value is max at heel for one FX and max at toe for another. Immensely doable, I could even do this on my old GT-8 IIRC. But there needs to be a way to stipulate which expression pedal position is max range and min range for individual effects.