Welcome!
New profiling (Better cab separation)
-
pacocito -
November 27, 2014 at 6:29 PM -
Thread is marked as Resolved.
-
-
Welcome, Pete. I believe the USB was intentionally disconnected with the 2.8 firmware, which is why a lot of USB sticks don't seem to be working with it. If you need to use a USB stick, flash the firmware with an older version of kaos.bin while holding < and > when your Kemper is booting up.
-
Ok guys i got too many personal forum mails because of some Merged DI profiles for testing
I post a link to some Profiles here:
https://www.dropbox.com/s/ig7fehxmtcpud3p/Merged Profiles for Test.rar?dl=0
That rar includes EVH, JVM 215 combo, Blackstar HT-1, Mesa Stiletto, Orange Jim Root and Engl Powerball
Mainly Metal tones..but from the EVH also a killer Clean Profile.Please be sure..they work only with 2.8 or higher, they will not show up in Rig manager..you have to import via USB stick
Cheerz
Lars -
Welcome, Pete. I believe the USB was intentionally disconnected with the 2.8 firmware, which is why a lot of USB sticks don't seem to be working with it. If you need to use a USB stick, flash the firmware with an older version of kaos.bin while holding < and > when your Kemper is booting up.
I'm a little confused on this, it appears that the latest release is 2.7.4 and it seems to support the new merged profiles. Does 2.7.4 work the same as the experimental version with regards to the new merged profiles? If that's the case it might be worth trying for those who are having problems with the experimental version.
-
yes works also, but 2.8 profiles dont work with 2.7.4
-
yes works also, but 2.8 profiles dont work with 2.7.4
Are you sure? I thought that I used 2.8 profiles with 2.7.4 with no problems but maybe I'm mistaken. Either way, if 2.7.4 Release supports merged profiles then it doesn't make sense to use 2.8 Experimental any more, does it? Or am I missing something? -
Thanks for the effort and the profiles Lars!
-
some friends of mine were not able to use 2.8 profiles with activated button for new profiling. Without they should work. I will not downgrade, have no issue and too many 2.8 profiles
and yes it works with 2.7.4 also -
I couldn't get them transferred from my usb, tried un activating new profiling button..
-
I'm a little confused on this, it appears that the latest release is 2.7.4 and it seems to support the new merged profiles. Does 2.7.4 work the same as the experimental version with regards to the new merged profiles? If that's the case it might be worth trying for those who are having problems with the experimental version.
The only information I have is that the new profiles will not work with 2.7.4, as per Kemper Amplifiers. The profiles use a completely different storage format from the current profiles, some additional information I guess, which will not work on revisions other than experimental revision 2.8.
As far as USB, this is just speculation, but I've seen a lot of posts about users that were unable to connect their sticks to the Kemper after the upgrade. It might not be intentional blocking. Could be something as simple as requiring a format of the USB stick within 2.8 for it to work. I have not upgraded to the new firmware, so I can't confirm this.
-
Troy....you run 2.8?
-
-
than you are the first, many friends tried but they will not show up in Rigmanager. Check pdf again, maybe i have higher 2.8 version they changed once
-
Thanks Lars!
I was on Firmware 2.8.1.10622b and went back to 2.8.0.10549b and they worked.
I'm going to try out your profiles now!!Thanks again
-
remember, you can save a merged cab and use with other DI profiles without merging again. Also my Hesu cab is not always the same
-
Good to know. I'm really liking the EVHlll and ENGL!
-
Thanks for the kind welcome, guys!
-
I have a Radial Engineering JDI box. Would I be able to use this as a bridge between the amp and cab?
-
I have Art Z direct DI box. Its chaep and work well.
-
Thanks Lars!
I was on Firmware 2.8.1.10622b and went back to 2.8.0.10549b and they worked.
I'm going to try out your profiles now!!Thanks again
Where can you get these OS-versions ?
I'm still with 2.7.4xx and don't know where to upgrade. -