- The Profiler Model referred to in this thread is ...
- ☑️ Profiler Head/Rack
Hello,
I try to create a rig to reproduce an old 80’s trick use with Roland SDE3000 delay.
My profiler is a head version, connected with Spdif Output to my soundcard RME.
Output configuration is « Master Stereo ».
Idea is to have a hard pan for « stack » (mono) on one side and delay on the other side (mono) on the « Master Stereo Output » Spidf.
It can be use to create a chorus simulation for ex (with a delay of 14ms) or a more present « ping/pong » effect with a delay of 350ms etc.
I didn’t found the way to pan the stack on only one side and the delay on the other directly one the différents delay modules, so I study the possibilities and found a way by using the « Melody Harmonic » (using only 2 delay (one at 350ms for ex, and second at 0%), at unisson, with 0 %feedback, 100% wet, with panorama to 100% left for one and 100% right for the second).
it works great, but…strangely, I can not go under 40ms for the timing of delay…
(EDIT : fine ajustment is possible directly with knobs on profiler head/rack/stage, issue only concerns Rig Manager…event using « SHIFT » command)
Maybe, is there another way to do it (using the same Output configuration : Spdif « Master Stereo »)?
Sure, I know i can do it with my DAW etc but idea was to do it directly with the Kemper to create a complete dedicated rig.