Clarified: How do you get the Mission EP1 Expression Pedal to work with the Profiler Player?

jasonmaxwell · April 1, 2024 at 8:32 PM

How do you get the Mission EP1 Expression Pedal to work with the Profiler Player? I plugged it in with a TRS cable, and when I turn wah on, the pedal doesn't do anything. I've tried On and the various bypass @ positions. Is there some kind of special software I need to update or a setting in rig manager? Or am I missing something?

Thank you!

Wheresthedug · April 1, 2024 at 8:49 PM

Firstly male sure the TRS cable is in the correct output on the EP1. One works is used for the expression pedal while the other (TS) is for the toe switch). They aren’t interchangeable.

Next I would load a wah preset rather than a blank Wah effect to make sure you have something that is definitely set up to work properly.

Make sure the Pedal Type is set to Wah in the system menu.

jasonmaxwell · April 1, 2024 at 9:02 PM

Thanks for this. How do you set up the pedal type? Is that the Wah > Vol thing?

christianbad · April 1, 2024 at 11:44 PM

forget about the switch and select "bypass @ Stop" as pedal mode

jasonmaxwell · April 1, 2024 at 11:59 PM

Thanks. I tried the bypass at stop and no dice there either. Will try the switch in the settings when I get home tonight.

jasonmaxwell · April 2, 2024 at 4:55 AM

Ok got it to work. Thanks. There was a section that said pedal type, and I had to select type 1 and then select wah instead of volume.

Burkhard April 5, 2024 at 1:52 PM