The problem affects only the XLR outputs – after about 10 minutes, they start crackling and sounding bad
Where do you connect the XLR cables to? Maybe the Input of that device causes the crackling?
Posts by christianbad
-
-
There are a lot of good SLO-100 profiles and 5150´s for free in Rig Exchange. Then all you have to do is add delay and pitch detune and you're done, here are some settings:
-
Wenn du wirklich herausfinden möchtest, was da genau wo nicht stimmt, würde ich an deiner Stelle beim Support nachfragen, hier im Forum kann dir das garantiert keiner lösen.
-
Auf der letzten Seite der Systemeinstellungen steht die Version,
beim starten steht es auch auf dem Display
-
Das könnte auch am Ethernetkabel liegen. Mal ein anderes probiert?
-
-
Well, it's basically a modernized Digitech Whammy.
That’s true, but the point is that it doesn’t warble at all with clean chords and seems to have a very low latency.
(The "missing warble" you could hear at the specific point I linked in the video above, which was unfortunately removed.)
-
...will this be possible with the MK2? would make me buy one...
[video removed]
-
All of the buttons are push in.
this is dangerous. you risk to get an electric shock,
from the manual:
If you should hear noise on any outputs, please check the GROUND LIFT buttons on the back panel (or Ground Lift options in the Output Section of the PROFILER Stage). These may only be used selectively and must never be activated all at the same time. This is very important. Otherwise, you might not only face a shielding issue, but also a serious health risk.
-
Kemper Profiler Stage, d.h. Profiling ist nicht möglich
Mit der Stage kann man eigene Profile erstellen, das stimmt nicht.
-
Deinen Amp profilen musst du genau so wie auf deinem Bild dargestellt. Ist da im Bild was unklar?
Wenn du dein Profil dann spielen willst, brauchst du natürlich eine Endstufe zwischen deiner Stage und deiner Marshallbox.
Deine Frage ist mir nicht ganz klar...
-
he only capability Kemper’s Quad Delay is missing is independent control of each of the 4 delay’s feedback level
to go 100% Holdsworth/Yamaha, you would also need
1- the flexibility to route the delays just about any way you want, being able to feed any particular delay into any other delay, and even feeding one delay into as many as 7 others...or doing them all in parallel
2- a independent mix, level and modulation control for every single delay line and the option to use different modulation sources/LFO´s
would be awesome
-
I love the amp block compression. I often set it at 3.5. Rolling back my guitars volume cleans up the amp’s distortion just as much before. The only difference is that there’s less actually volume loss. This means that more of my guitar’s volume knob range is useable, enabling me to not change rigs or turn something off to get a cleaner sound.
that´s an perfect description of what it does. known by audio engineers as upward expansion.
makes the softer sounds louder. one of the the best things in amp block, imho.
-
it´s not possible in Rig Manager, but on the Toaster the delay time goes below 40ms, down to 1ms.
Probably on the stage, too.
-
C'est stereo; avec une prise RCA (cinch).
Vous devez probablement utiliser le Toaster comme MASTER (Clock Settings)
Qu'est-ce que la sortie SPDIF : explication d'une norme d'interface audio numérique | SoundScapeHQObtenez un guide complet sur la sortie SPDIF, une norme d'interface audio numérique. Comprenez son fonctionnement, ses types et comment l'utiliser avec dessoundscapehq.com -
Am I the only one who has problems to quote here in this forum?
no problem here
-
It's sad when usability issues are called features and written off for improvement
it is a feature, that you don´t seem to understand. it´s explained in the manual.
-
hi, which cable is used to connect player with mc6?
in addition to #6, you can also use a regular Midi cable
-
Thanks, that's how I solved it. What does this depend on?
most headphones use a adapter. try a different one. this can also happen with a defective head phone cable
-
Warum sonst nutzt man sie, um zB Keyboards an Mirofoneingänge anzuschließen?
ich dachte immer, das man dort die DI Box zum symmetrieren einsetzt.
Danke für die Info.
