Mission Ep1-KP wha/vol issues (Solved)

emmanuelrotondo · July 27, 2023 at 9:46 AM

Hi everyone. since last update in my kemper stage, i cant work with my mission ep1-kp, the configuration is ok, out 1 trs: volume, pedal type 1. out 2 : mono switch for activate wha. i can activate wha but the volume still working (wha pedal>vol is ok). cables are ok. since i have this unit, my configuration is the same and always perfect, but since the usb rec and more was come, my pedal doesnt work anymore. the manual doesnt give me any solution. help me please. i need this for work.

Kellerblues · July 27, 2023 at 11:07 AM

You need to set the Pedal to Volume>Wah. If it's set to Volume, it will do only that. Check also if eventually you have swap the cables: it happened to me once

emmanuelrotondo · July 28, 2023 at 8:15 AM

thanks! the cables (and the cables themselves) are ok. and the setting is that: Pedal to Volume>Wah.

still cant work

Kellerblues · July 28, 2023 at 9:18 AM

please open a support ticket

Kemper Support #1 · July 28, 2023 at 9:44 AM

you need to configure the pedal as a wah pedal and activate the "wah to volume" pedal link. There is no "volume to wah" pedal link.

emmanuelrotondo · August 2, 2023 at 3:43 AM

Quote from Kemper Support #1

you need to configure the pedal as a wah pedal and activate the "wah to volume" pedal link. There is no "volume to wah" pedal link.

yes! thanks a lot. i was talking with someone from kemper, by e mail, who told me this. solved!

Burkhard August 2, 2023 at 6:24 PM