Quote from Allenhuish

I have just received a parcel from amazon and this device works perfectly and is powered by USB.

I've had it running for a couple of hours powered by the Kemper and works perfectly. Can work 2 different ways: will add your kemper to your home/studio wifi network or create it's own network if you're on a gig. This solution won't work with a remote, but otherwise it looks like the neatest and cheapest thing.

There are a few different versions, but this one was the cheapest that I found on ebay UK, just under £20.

https://amzn.to/3gSp3CA

[Blocked Image: https://images-na.ssl-images-amazon.com/images/I/61XnHPPROZL._AC_SL1000_.jpg]

How long are the cables? The Rack version doesn't have a USB port on the backside...

Quote from Allenhuish

Sorry, I haven't tried it yet. I was holding off as there is a rumour that the kemper team are going to test out a few different options. The thing I'm hoping for is powering everything from USB on the kemper, but to be honest I don't think it will happen.

However, (no guarantees), I'm pretty good with networking etc. and I have a very high expectation that it would work.

Here is a cheaper option for powering POE through a router for only £25

https://amzn.to/2TQJ98B

And for wireless this is £30 and really tiny

https://amzn.to/3qc4ZPT

The wifi access point is incredibly small and needs no power other than from the other box.

At the moment, this looks like the most efficient/cheapest setup with only one power supply needed, plus uses the remote and wifi.

The only thing that would be better is if the kemper crew can find something that works with USB power from the kemper, but it seems unlikely to me.

Also, you only need both of those devices if you want to use the remote and the ipad app at the same time.

Display More

The Tenda Tef1105P-4-63W did not power my remote. maybe it supports only PoE mode B.
Now i ordered a TP-Link TL-SG1005P as it works for nottoohigh .

The Mikrotik mAP lite is really tiny, but after two hours trying to set it up i decided to send it back.

i now ordered the usb powered device https://amzn.to/3gSp3CA that works for Allenhuish . I hope configuring will be easyer with this one.

Quote from Allenhuish

I have just received a parcel from amazon and this device works perfectly and is powered by USB.

I've had it running for a couple of hours powered by the Kemper and works perfectly. Can work 2 different ways: will add your kemper to your home/studio wifi network or create it's own network if you're on a gig. This solution won't work with a remote, but otherwise it looks like the neatest and cheapest thing.

There are a few different versions, but this one was the cheapest that I found on ebay UK, just under £20.

https://amzn.to/3gSp3CA

[Blocked Image: https://images-na.ssl-images-amazon.com/images/I/61XnHPPROZL._AC_SL1000_.jpg]

Not saying this as gospel, but I think powering a device using the USB on your Kemper might not be desirable. Could DonPetersen confirm that?

Quote from Allenhuish

.....

I am holding off the tp-link because I would prefer the power supply on the tenda (the tenda uses a kettle mains cable like the kemper so I can get an adapter to power both) the tp-link uses a wall wart adapter which requires a socket (more space used up in the back of the kemper)

Maybe you could buy a separate power supply (i am thinking about that). and you could eventually power the wifi devicee with PoE https://www.omg.de/ubiquiti-netwo…3af-usb/a-14504

did you have to configure the vonets device or just plug it into the kemper and make a wifi connection from the ipad with the default password?

I made my Kemper Remote WLAN capable years ago, don't know if anyone cares

but this is how it works for me:

You need two small travel routers which you can use as an access point and can be configured as a client (TP-Link TL-WR902AC AC750 WLAN Nano Router), as well as a POE (TP-Link TL-POE150S)

One of the routers is configured as an access point with a fixed IP address (DHCP client should be ON, it is also by default)

then connect this to the Kemper using a network cable.

(Do not forget to set the WLAN SSID network name and password).

The second router is configured as a network client and connected to the WLAN of the first router.

Then connect this to the remote via the POE.

That's all

KEMPER -> Accespoint ( Air ) WlanClinet -> POE -> Remote

Everything for about 80 Euro.

You can also use the smaller router from TP-Link

(TP-Link TL-WR802N N300 WLAN Nano Router for 20 euros)

however, this one can only work in the 2.4GHz band and I wanted to use the 5GHz to avoid interference.

So, I can login the iPad to the WLAN very simple.

Here os a short video what it looked like during testing.

Ok i will try That.

But i would prefer Connection to the Kemper directly

Quote from Allenhuish

I have also just tried an old device that I had laying around - Netgear WNCE2001

Success:
TP-Link TL-SG1005P and Netgear WNCE2001 worked immedeatelly.
WNCE2001 is connected to my home WiFi.

i connected:
- Remote
- WNCE2001
- Kemper

to the TL-SG1005P

and the PC via USB

KPA + Remote + RigManager (iPad) + RigManager (PC) work simultaniously.

I will try again with the Vonets to connect direct to the Kemper without the home wifi.

Quote from Allenhuish

I am holding off the tp-link because I would prefer the power supply on the tenda (the tenda uses a kettle mains cable like the kemper so I can get an adapter to power both) the tp-link uses a wall wart adapter which requires a socket (more space used up in the back of the kemper)

you could use this with the TL-SG1005P power supply.
https://www.amazon.de/perfk-Netzkabe…24634892&sr=8-5

Hi,

Thanks for putting all the information in one place.

The Amazon links in your lead post lead to this message.

Quote from Allenhuish

Hi there,

I would like to start a thread that is limited to *only* what hardware has been found to work or should work to allow wireless to be added to our legacy devices.

I did a video with an explanation...

If you don't want to read the whole thread here are some devices that work:

Vogels/Vonet wifi access point Amazon UK - https://www.youtube.com/redirect?event…zn.to%2F3dmKNFU
Amazon US - https://www.youtube.com/redirect?event…zn.to%2F36aq04t

TP-Link Switch with Power
Amazon UK - https://www.youtube.com/redirect?event…zn.to%2F36aqpnv
Amazon US - https://www.youtube.com/redirect?event…zn.to%2F3h1QuLI

Power adapter to use one cable for kemper and router
Amazon UK - https://www.youtube.com/redirect?event…zn.to%2F3qsyTj4

Display More