I think it's discontinued, but Daniel will answer on this.
Converter to use Line6 FBV Boards with the KPA
-
mDan -
January 10, 2012 at 2:43 PM -
Closed
-
-
IMO with the imminent KPA eprom for the FCB thebsolution with the Line 6 board interface becomes less and less attractive.
My recommendation is sell them and move on. -
I have it working with a solution made by a buddy of mine and it works like a charm. Once the bidirectional midi communication is enabled inside the KPA it will also be able to receive the information about the effect slots and display its state. The solution itself is a small external box translating the proprietary L6 protocol into midi. For more info take a look at http://vlotech.nl/?q=node/252. IMHO the FBV floorboard is much more stable than the FCB1010 and also offers more switches.
HTH
Cheers
Jürgen -
I still have enough PCB boards... so if anyone wants one just send me a PM. Heiko also developed a firmware for the Kemper which works very well.
-
tried sending a pm but not sure if it went through. Interested in getting a pcb for FBV. thanks!
-
Lets see if we can get it to work with the KPA (we will!)
Heiko got Stompstate and Presetname working, Tuner and Tap Tempo will follow (as soon as I get my hands on the UnO4Kemper or Kemper releases a complete midi documentation).[Blocked Image: https://dl.dropboxusercontent.com/u/9333867/kpaline.jpg]
Still got some boards if anyone wants one... but remember: this is no plug and play solution, you have to like "DIY" and know some basics about programming.
-
-
Extremely interesting, because I own a FBV too. Very good piece of gear. What about Perfomance Mode? There are only 4 switches in the bottom row of the FBV. Or do you plan the favourite switch as the fifth? Please keep us up to date.
-
*tütemückenrüberreich* -
*tütemückenrüberreich*Mücken?
I don't get itKempermaniac: Dunno, I didn't check the performance mode out yet.
-
Mücken?
I don't get it -
-
Nice work!
-
Very cool!
-
Where can I buy this?
I'm getting really tired of waiting for the KFC to be developed! -
Where can I buy this?
I'm getting really tired of waiting for the KFC to be developed!
Ask mDan where to buy.
Otherwise you can always use any MIDI controller of choise with the kemper.
A good option is to get the cheap popular Behringer FCB-1010 and sell it when the kemper controller is out. -
So dan, how much and can you sell me one?
Cheers
-
-
Judging from the video Tap / Tempo doesn't seem to work.Timo
It does work Just not in config mode (no need for tap tempo there).
-
We can do a collective order for the pcb boards when the software is finished. Depending on how many people want one it should be very cheap.
-