send midi on rig change

slateboy · February 12, 2016 at 4:45 PM

Anyone know if it is possible to relay a midi prog change (or any midi data whatsoever) upon selecting a new rig in performance mode.
Not talking midi thru data from a pedal, unless its the Kemper remote doing its business.

Looking for a way to trigger other midi gear upon rig-change without the need for an additional midi controller, or doing it with just the Kemper remote (which i dont currently own)

thanks midi-heads!

paults · February 12, 2016 at 4:54 PM

In Performance Mode, you can send up to two MIDI PC changes, on two different channels, when you select a Performance Slot.

ampoholic · February 12, 2016 at 4:59 PM

Yup, I run a Glass Nexus and a Loop Expander with midi in Performance mode. Works great. You can set the midi "THRU" to be a second midi "OUT"

slateboy · February 13, 2016 at 2:23 AM

Thanks guys. I usually have midi ox/yoke running on the midi thru of the Kemper to change pc messages to other stuff driving some other midi gear from my fcb1010.
So if I have a Kemper remote I can still enjoy the benefits of controlling my existing midi gear?

NyteOwl · February 13, 2016 at 2:12 PM

Running my KPA in performance mode, I control two other devices via MIDI.

While not the KPA recommended method, I have both devices on the same MIDI channel and using corresponding preset numbers, and I daisy-chained the MIDI connections so when I select a rig slot in Performance mode both external MIDI devices change to their respective required presets or to MIDI-mapped presets. I have yet to try it, but by doing it this way I should be able to add another MIDI device to the MIDI chain at some point in the future, should the need arise.

slateboy · February 14, 2016 at 11:59 PM

Quote from NyteOwl

Running my KPA in performance mode, I control two other devices via MIDI.

While not the KPA recommended method, I have both devices on the same MIDI channel and using corresponding preset numbers, and I daisy-chained the MIDI connections so when I select a rig slot in Performance mode both external MIDI devices change to their respective required presets or to MIDI-mapped presets. I have yet to try it, but by doing it this way I should be able to add another MIDI device to the MIDI chain at some point in the future, should the need arise.

So, just confirm, what foot/remote controller are you using?
thanks

NyteOwl · February 15, 2016 at 4:31 PM

Sorry, I'm using a Remote.