For me can be useful.
Tks!
For me can be useful.
Tks!
For me can be useful.
Tks!
Did you made any new panel fx upgerades? It can be very usefull And I like your panel style:) Im workin right now to recive live parameter change on the KPA so right now i dont have time to upgerade an editor panel.
For me can be useful.
Tks!
I was thinking - what the heck for?
Then I got to thinking that I'd like to strip all amp section tweaks from my profiles, and it would probably be easier to do this offline.
What scenarios do you see, Sandokan71?
If we could assign all parameters assigned in the profiling process that would be something!
Just asking - it's not primary things to do on list - but maybe its worth . Loading kpir file - send it to KPA or edit it off line and save.
Just asking - it's not primary things to do on list - but maybe its worth . Loading kpir file - send it to KPA or edit it off line and save.
Yeah - I just asked because there could be very different implementations of this bassed on what people would actually use it for
Did you made any new panel fx upgerades? It can be very usefull And I like your panel style:) Im workin right now to recive live parameter change on the KPA so right now i dont have time to upgerade an editor panel.
Now I'm studing a way to recall the panel passing the stomp (ie. A,B,C,D, X) as a parameter to be used in SysEx. I don't want to clone 5 time the panel... For example I want to pass a variable X=32 (A stomp) calling the stomp panel and then sending SysEx f0002033027f0100XX410001f7 (example for freeze formants ON). Another way may be a drop down list to choose the stomp to be assigned directly in stomp panel but in this case I need to know how mix value of one modullator to send a sysex with another modulator.
Do you have any idea to do this?
Also I need some undocumented parameters/value info for pitch shifts effects.
In attach two panel to show the two concept (warning this is not functional and some sysex impemented so use an emulated midi interface to try).
https://www.dropbox.com/s/g4nbpb1lpflfrni/MyKPA_936_6_Venus_2015-04-13_23-07.panel?dl=0
I was thinking - what the heck for?
Then I got to thinking that I'd like to strip all amp section tweaks from my profiles, and it would probably be easier to do this offline.
What scenarios do you see, Sandokan71?
Just asking - it's not primary things to do on list - but maybe its worth . Loading kpir file - send it to KPA or edit it off line and save.
Exactly, downolad, edit offline and upload...
Now I'm studing a way to recall the panel passing the stomp (ie. A,B,C,D, X) as a parameter to be used in SysEx. I don't want to clone 5 time the panel... For example I want to pass a variable X=32 (A stomp) calling the stomp panel and then sending SysEx f0002033027f0100XX410001f7 (example for freeze formants ON). Another way may be a drop down list to choose the stomp to be assigned directly in stomp panel but in this case I need to know how mix value of one modullator to send a sysex with another modulator.
Do you have any idea to do this?Also I need some undocumented parameters/value info for pitch shifts effects.
In attach two panel to show the two concept (warning this is not functional and some sysex impemented so use an emulated midi interface to try).
https://www.dropbox.com/s/g4nbpb1lpflfrni/MyKPA_936_6_Venus_2015-04-13_23-07.panel?dl=0
which exactly parameters do you need?
FreezeFormants 6465
FormantOffset 6466
Detune 6458
Voice2_Pitch 6457
Voice1_Pitch 6456
Voice_Mix 6455
Voice1interval 6462
Voice2_interval 6463
Key 6464
SmoothChords 6460
which exactly parameters do you need?
WhaPedal to Pitch (not so important)
Voice 1 Interval (harmonic pitch)
Voice 2 Interval (harmonic pitch)
Low Cut (analog octaver)
Probably the same parameters are used in other Pith effects but in a different way...
Tks!
WhaPedal to Pitch
Voice 1 Interval
Voice 2 Interval
Low CutTks!
FreezeFormants 6465
FormantOffset 6466
Detune 6458
Voice2_Pitch 6457
Voice1_Pitch 6456
Voice_Mix 6455
Voice1interval 6462
Voice2_interval 6463
Key 6464
SmoothChords 6460
16295 pitch to wah
16294 vol to wah
I will try to find low cut:)
Just for curiosity - do you need an off line rig (kpir) editing ?I think it is possible to open kpir file - edit its parameters and save to the kpir file again for import to the KPA. It will be useful or not?
Absolutely...... +1 on that!!
Hi guys, check this:
http://www.musiker-board.de/threads/kemper…37#post-7413297
Someone put just an Ethernet cable in the kemper and got a remote in the browser..
http://www.musiker-board.de/attachments/up…-33-png.420095/
A webserver into KPA! Wow! I hope that this is true... May be an interface to test the integration with the remote without the remote.
Hi guys, check this:
http://www.musiker-board.de/threads/kemper…37#post-7413297Someone put just an Ethernet cable in the kemper and got a remote in the browser..
http://www.musiker-board.de/attachments/up…-33-png.420095/
Wow - nice find!!! It seems that there is a lot of surprises inside the KPA:)
A webserver into KPA! Wow! I hope that this is true... May be an interface to test the integration with the remote without the remote.
Wow!
Need to check this
It will be disabled in next fw release
@DamianGreda - I've been watching this effort you have started along with your efforts on use of the looper via MIDI. I am amazed at your talents and impressed at how you utilize them. Not many folks have your talents and even fewer choose to use them for the good of the community. Thank you for being a positive force. I really think your approach at dealing with Kemper regarding the looper MIDI implementation was key in the Kemper folks agreeing to re-enable the MIDI code.
@DamianGreda - I've been watching this effort you have started along with your efforts on use of the looper via MIDI. I am amazed at your talents and impressed at how you utilize them. Not many folks have your talents and even fewer choose to use them for the good of the community. Thank you for being a positive force. I really think your approach at dealing with Kemper regarding the looper MIDI implementation was key in the Kemper folks agreeing to re-enable the MIDI code.
Thank you:) - big thanks to the Peto also - he figured out most of the looper functions:)
big thanks to the Peto also - he figured out most of the looper functions:)
Agreed. Not intending to "short change" any of the other folks working both of these projects.