Erase all profiles

saltydog3317 · February 22, 2015 at 8:30 PM

I have recently been purchasing the Michael Britt Profile Packs. I really like everything I have purchased from him. I have all 4 of his packs now after purchasing his #3 pack today. When I tried to install his newest pack today it only installed 14 rigs and said the memory was full. What I would like to do is erase everything from the Kemper and only install the Michael Britt packs as I just dont use any of the rigs that the Kemper shipped with.
Is this safe to do? Is it OK to erase all the profiles on the Kemper and just load the Britt packs back on it?
If so, how would I do this? Dont see anything in the manual explaining how to go about this.

Thanks Kevin

Raoul23 · February 22, 2015 at 10:05 PM

Hi Kevin do you use Rig Manager. If so this would be the quickest and easiest way I think. You would be able to see the rigs on the Kemper arramge by author in RM and delete all the ones other than MBritt. This should in theory take around 30 seconds, if you were to do it in manual mode on the Kemper it would take quote a while.

alwainwright · February 22, 2015 at 10:10 PM

Under System menu on the Profiler (page 8 of 9), there is "Erase Non-favorites" check box. This a quick way just using the profiler.

Raoul23 · February 22, 2015 at 10:15 PM

Quote from alwainwright

Under System menu on the Profiler (page 8 of 9), there is "Erase Non-favorites" check box. This a quick way just using the profiler.

If he was to do it this way though he would have had to favourite all the rigs he likes, which if like he said the KPA
has run out of memory then that's probably quite a lot of rigs out of 1000 he would have had to gone through and favourited. rM is still the best way I think

alwainwright · February 22, 2015 at 10:43 PM

Quote from saltydog3317

What I would like to do is erase everything from the Kemper and only install the Michael Britt packs

I was responding to his request.

saltydog3317 · February 22, 2015 at 10:50 PM

Great thanks for the help. I kept the Bass rigs and marked them as favorites and then deleted everything but favorites then installed my 4 Michael Britt packs and now have 268 rigs stored on the Kemper. I believe that might be less than what it shipped with so I still should have lots of storage left.

Thanks again Kevin

Raoul23 · February 22, 2015 at 10:54 PM

Quote from alwainwright

I was responding to his request.

Yep that's cool but I was under the impression that he had 1000 rigs on his kemper already that's why he couldn't install anymore. I tried to erease all the rigs from my live Kemper a couple of weeks and fell exactly in to this problem I had around 500 profiles, I'd favourited
about 60 rigs, I then erased non favourites and still had 60 I had to delete manually which was a bit of a pain and tock quite a while

Raoul23 · February 22, 2015 at 10:56 PM

Quote from saltydog3317

Great thanks for the help. I kept the Bass rigs and marked them as favorites and then deleted everything but favorites then installed my 4 Michael Britt packs and now have 268 rigs stored on the Kemper. I believe that might be less than what it shipped with so I still should have lots of storage left.

Thanks again Kevin

How many rigs did you have on your Kemper for it to say memory full?? It should have been a thousand?

rdwilson · February 22, 2015 at 11:16 PM

Quote from alwainwright

Under System menu on the Profiler (page 8 of 9), there is "Erase Non-favorites" check box. This a quick way just using the profiler.

thanks, I will try this.

saltydog3317 · February 23, 2015 at 5:06 AM

I had what it shipped with which was about 290 and then all the first 3 of Michael Britt packs so thats another 180 and when I tried to put the most recently released pack from Michael Britt on, it said added 14 profiles and after that it would not let me put any more on. Each pack from him has 60 profiles so I was missing about 46.
I read that I could put 1000 profiles on the Kemper so I am not sure what happened. Its not that big of a deal anyway. Most of the profiles it shipped with are garbage anyway. I only use the Michael Britt profiles and a few Bass profiles.

chrismilne · March 22, 2020 at 3:39 PM

I just tried this in Rig Manager (select all and delete) and i had 400+ on the profiler, after 20 min's it's dropping but only down to saying Deleting Item 259 of 1 (which is an odd message)

Was there a better way? i'm afraid to stop it...deleting 1 at a time was very fast, do not sure why this is slow.

Burkhard · March 22, 2020 at 4:19 PM

There is a function Erase Non-Favorites in System Settings. After that exercise only your Favorite Rigs are left, which you can either keep or delete one by one.

merseymale · March 31, 2020 at 10:39 AM

Newbie Question!:

how to delete “1by1”?

(my laptop is Windows7 & Rig Manager only works from Windows 8.1 & up...)

Burkhard · March 31, 2020 at 11:47 AM

Turn BROWSE knob, select and then press soft button "Delete".

Crossroads · April 1, 2020 at 4:44 AM

Quote from chrismilne

I just tried this in Rig Manager (select all and delete) and i had 400+ on the profiler, after 20 min's it's dropping but only down to saying Deleting Item 259 of 1 (which is an odd message)

Was there a better way? i'm afraid to stop it...deleting 1 at a time was very fast, do not sure why this is slow.

I had the same issue deleting from Rig Manager. I stopped the process a couple of ties and restarted and found the issue. While you are deleting you need to keep the window active, If you click on any other window it appears to be deleting but isn't and you get that strange message.