Any recommendations for a pedalboard to house the above? Doesn't need to be multi levelled etc.. I'll only be using the Remote and the two expression pedals
Pedalboard for the KPR and 2x DVP3's
-
PVO_Dave -
January 16, 2015 at 3:52 PM -
Thread is marked as Resolved.
-
-
The case that was originally made for the Line 6 FBV is still available at Thomann and the Remote + 2 DVP-3's fit perfectly size-wise.
http://www.thomann.de/de/thon_case_fuer_line6_fbv.htm -
Looks good. Since I still Use my good old Rack with a G-System I tend to look for a pedalboard with two pedals (which could be used for Kemper & G-System) and try to fit my Kemper Remote in the Back of my Rack (having the rack version of the Kemper...)
-
After some thought on this, I really like the item of the raised floor of the Swan cases, think I'll go for this one: http://www.swanflight.com/guitarist-flig…board-case.html
I did a to scale mockup of the layout, this is how it would fit on the carpet section, works for me
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Pedalboard%20-%20Kemper%20-%20mockup%20small.jpg]
-
Looks good. Since I still Use my good old Rack with a G-System I tend to look for a pedalboard with two pedals (which could be used for Kemper & G-System) and try to fit my Kemper Remote in the Back of my Rack (having the rack version of the Kemper...)
@TomR The G-System does not send MIDI expression data. If you want to use expression pedals to control the Kemper, they will have to be connected to the KPA or the Remote.
-
After some thought on this, I really like the item of the raised floor of the Swan cases, think I'll go for this one: http://www.swanflight.com/guitarist-flig…board-case.html
I did a to scale mockup of the layout, this is how it would fit on the carpet section, works for me
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/Pedalboard%20-%20Kemper%20-%20mockup%20small.jpg]
This is exactly the route I'm going.
-
@TomR The G-System does not send MIDI expression data. If you want to use expression pedals to control the Kemper, they will have to be connected to the KPA or the Remote.
paults: I'm using two Boss-Expression Pedals (Boss FV-500-H) with my G-System. Maybe I was not precise enough. I'd like two use the expression Pedals with my old G-System Rig (with Engl Preamp & Poweramp) and with my new Rig (Kemper Rack Powered). -
paults: I'm using two Boss-Expression Pedals (Boss FV-500-H) with my G-System. Maybe I was not precise enough. I'd like two use the expression Pedals with my old G-System Rig (with Engl Preamp & Poweramp) and with my new Rig (Kemper Rack Powered).Understood. Great!
I have a similar old G-System rig/new Remote rig plan, too
-
This is exactly the route I'm going.
Me too!
-
The Swan Flight case arrived this morning, it's solid as a rock, big ol' thing too
I'll grab a photo with the two DVP's on there later.
-
-
Looks good
-
@PVO_Dave, that is gonna be sweet for sure!!
-
That looks like a good size- you would still have room for a Guitar A/B switcher, a talkbox, and, of course.........a Korg Miku!
-
This looks good.
-
I like the look of it. Good pick.
-
Quality is great for anyone thinking of ordering, it is a big / heavy lump though, that's without any pedals! Feels very solid underfoot though because of it.
I will have a go at measuring the height in the lid and then have a guess at the two sizes of foam to put in the lid, want to make sure the pedals and the KPR stay put in transit Probably be a smart idea to use a velcro cable tie for the ethernet cable too, I can then attach it to the board when not in use.
-
Is there a good soft case that can contain the same setup?
-
Is there a good soft case that can contain the same setup?
I wouldn't want to risk my remote and expression pedals in a soft case.
-
Thought I should update this, following the mock ups etc.. I changed the layout, to save me being an idiot and engaging wah instead of volume of something equally as daft
The flight case is big and heavy, but the upside is, it'll protect the KPR and pedals well. To ensure everything stays in place during transit and the carpet doesn't get too stretched from the velcro tugging, I ordered some 3cm and 4cm foam to fit inside the lid to take out the free space between the KPR and DVP's. I also ordered the right spray glue, cut it to size and fitted it last night, very happy with how it came out
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070049.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070051.jpg]
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070056.jpg]
Showing the different height foam (excuse the lens flare)
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070058.jpg]Closed up
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070059.jpg]Indents left (to show the foam was a good fit :D)
[Blocked Image: http://i1175.photobucket.com/albums/r638/davewitchalls/KPR/P3070062.jpg]If you're happy to cart around a sizeable and heavy pedalboard (with the trade off that you'll get decent protection for the KPR) then I'd recommend one
-