Might "Performance Tempo" help at least in some of these cases?
Posts by TomR
-
-
Congratulations. Mine is like 2 meters away from me. Not setup for playing. But it is there. My first real preamp with tubes in it.
-
Some time ago I had the same issue but with a diferent device. I used a Screw to get it out.
-
Thanks Don. Mr. Peter Weihe (Some of you might know him) did talk at the "Frankfurt Musikmesse" about a similar topic in the good old days. Bottom line was: Do not try to make your Amp sound like on a record. On the record you are hearing a processed signal (MIC/Mic Preamp/EQ/...).
-
-
Für die Bank Wechsel gibt es zwei Modi. Beim einen musst Du dann noch einen der 5 slots aktivieren, bevor die Performance gewechselt wird. Olaf pending würde ich tippen. Müsste auch im manual zu finden sein…
-
Hey, welcome.
-
Hello Günther. Actually I am using one most of the time. It depends a bit on the situation. I use the sunday driver most of the time as a Sunday driver. Sometimes as a boost as well (to compensate for different volume levels on some of my instruments).
-
I bought my KPA Rack specifically for gigging live. At the time (2013) it didn't have a dedicated controller, but I used it for some time with an FCB1010 MIDI controller and a Uno4Kemper ROM chip.
When the Kemper foot controller came out, I replaced the FCB.
It just works. My setup is insanely fast, and the load-out is very light. Performances are very easy to setup and manage for gigs.
It is hard for me to imagine a better gig rig than the KPA.
Well, I could have just said the same..
-
This also isn't XLR.
You could use a stereo DI after the pedal. But that's another piece of gear and additional cables as well.
-
Maybe somethink like this? https://www.lehle.com/en/lehle-stereo-volume
-
Actually that is why I use one of these... https://www.thomann.de/de/neutrik_ndj.htm
-
Welcome!
-
-
-
-
Hey, Welcome
-
-
Welcome back.
-