Have just got a DXR10 so wanted to ask any other users how they connect it to the KPA? My first thought was to use the KPA monitor out into the line in on the DXR? Do you guys use a balanced cable ie TRS? Any other ways to connect? Beside this I'm just blown away by the sound of this thing - the power and crystal clear sound are awesome. I have been reading some opinions on the DXR here and really glad I did - a fantastic partner for the KPA!! I could easily see this coping with a small to medium venue without breaking sweat and then some...enough power to use without a front of house I would guess... Thanks guys!!!
Blown away by DXR10 but a question on connecting it
-
Mic2002 -
June 20, 2013 at 11:39 PM -
Closed
-
-
Hi mate I'm using Left Main out XLR from KPA to Input 1 set to Line on DXR, DSP off and HPF off, Volume on DXR 12 o'Clock, sounds great to me!
Ezergeezer
-
Thanks for that.. Is that a mono output ( rather than left or right of the stereo image)?
-
Hi mate I'm using Left Main out XLR from KPA to Input 1 set to Line on DXR, DSP off and HPF off, Volume on DXR 12 o'Clock, sounds great to me!
Ezergeezer
Same here
-
I use the monitor out because my main out goes to FOH.
Regarding main out and mono: make sure to switch the main out to mono in the master menu if you intend to do this.
-
The nice thing about using the monitor out to the DXR10 (or any other speaker of course) is that you can link it to the master volume and leave the main outs (which go to FOH) unlinked, so if you need to adjust stage levels during the show there won't be volume jumps in the PA.