Appologies if this is a repeat, but I can't find the tech spec for the remtoe and would like to know what the voltage and M/A delivered down the ethernet cable is
Does anyone know / have a spec sheet?
Appologies if this is a repeat, but I can't find the tech spec for the remtoe and would like to know what the voltage and M/A delivered down the ethernet cable is
Does anyone know / have a spec sheet?
Given the remote can be run from power provided by a POE injector (Power Over Ethernet)...the IEEE standard says 48 to 57 volts (usually 48).
The Remote works on a different voltage when fed from the PROFILER. Seperate wires are used for those two voltages. Don't feed 48 volts into the wrong wires since it could damage the Remote.
Thank Burkhard
That’s perfect and much appreciated
The Remote works on a different voltage when fed from the PROFILER. Seperate wires are used for those two voltages. Don't feed 48 volts into the wrong wires since it could damage the Remote.
Can the power from the Profiler cause damage to an ethernet switch or HUB?
Why deviate from the PoE/PoE+/PoE++ standards designed to make alle ethernet-devices interoperable?