Hey guys,
I'm automating my Kemper for live and I just can't figure out how to control the transpose stomp via MIDI. Is it possible?
Basically like the expression pedal just without pedal. All automated in Ableton.
Thanks!
Hey guys,
I'm automating my Kemper for live and I just can't figure out how to control the transpose stomp via MIDI. Is it possible?
Basically like the expression pedal just without pedal. All automated in Ableton.
Thanks!
It can be controlled via NRPN. The attached document is available on the KEMPER download page.
Transpose Pitch is 56 Voice 1 Pitch.
You can also control Transpose in Rig Settings, which allows to save one effect module:
Rig (Address Page 4)
0 Rig Tempo
1 Rig Volume
2 Rig Tempo Enable
3 Rig Panorama
4 Rig Transpose
One more hint:
Transpose in Rig Settings is expressed raw to 14 bit:
min="28" center="64" max="100"
A general hint: You can use "UI to MIDI" to figure out, which MIDI comands are needed to trigger specific actions.
Hi, have you solved the question?
And how, please?
Could you give me an example, please?
Thanks a lot
i need to control my kemper via Ableton, but unfortunately not all the parameters i need to control have a midi Cc, so i 'm obliged to do it with Nrpn but i can't understand how (max4live?) and the code
I'm using Reaper and ALMOST have this working through NPRN but can only get the MIDI message to change the transpose value to either -36 or 36. I have a transpose Stomp in slot A, and my MIDI lanes first send a CC99 value of 50 for Module A (Address Page 50), and a CC98 Value of 56 for Voice 1 Pitch. Then i'm sending a CC119 command, but no matter what value i chose it just changes the transpose value back and forth from -36 to 36.
I'm wanting to be able to change the Transpose value from 0, to -1, to -2. Has anyone been able to get this to work?
According to the MIDI Parameter Documentation Transpose in Rig Settings is address page 4 and has a value range of 28-100. Values outside of that range will set -36 or +36.
Thanks for the reply Burkhard. I've now tried CC99 value of 4 (Address Page 4), and a CC98 Value of 4 for Transpose, then have tried every individual value from 0-127 in the CC119 command. Each value gives me a Transpose result of 36, then when i click stop on my DAW and the playback returns to the beginning, the Transpose value changes to -36. I've also tried the CC 06 + CC38 combination, sending the same value in each command, and different values in each command, but it always results in Transpose 36.
To make sure i'm not crazy, i did change the CC 98 command to 3 for panorama, that works perfectly and i'm able to use CC 119 to specify any panorama value between -5.0 and 5.0.
Is there anything else i'm missing? I'm on OS 8.6.6, so could it be an OS bug?
This requires 14-bit resolution. To set Transpose in Rig Settings to for example -14 you need to send:
CC#99 4
CC#98 4
CC#06 0
CC#38 50 here is where the range 28-100 matters and reflects the Pitch range from -36 to +36!
To achieve the same with a Transpose in effect module B send:
CC#99 51
CC#98 56
CC#06 0
CC#38 50
That’s exactly what i needed Burkhard! Works like a charm now!
Happy transposing!