in Performance mode kemper remote crashes during 1 hour 3 times and booted new
Wtf in a live Situation ?
I m on the latest OS7.0.3
The RM was not connected
in Performance mode kemper remote crashes during 1 hour 3 times and booted new
Wtf in a live Situation ?
I m on the latest OS7.0.3
The RM was not connected
original kemper cat cable was used ?
or an other manufacture
I m on the latest OS7.0.3
That's not the latest version. I think meanwhile is 7.3.2 available. So you might want to update.
If the problem persists open a ticket to Kemper support. These guys are usally very helpful and will try to solve the issue.
Sorry os 7.3.2
Yes original cable
try to look if you got the reboot happens, when you move the cable when plugged, move on KPA side and Remote side
maybe the cable sits not tight enough or there is something loose
Crashes in my experience do only occur when you are editing sounds and use RigManager for this (also with the latest versions). In live situations using performances my profile never ever crashed.
in Performance mode kemper remote crashes during 1 hour 3 times and booted new
Wtf in a live Situation ?
I m on the latest OS7.0.3
The RM was not connected
When you say "crash" does it lock up and render useless or does it reboot and still function (albeit after the interruption?)
it does reboot, during this time kpa works, but the Parameter are not changeable
it does reboot, during this time kpa works, but the Parameter are not changeable
Thats pretty annoying.
Have you tried another ethernet cable. If its not to the spec (AWG) Kemper recommend perhaps a standard short ethernet cable to just to eliminate your cable?
Maybe jiggling the cable near the terminals might reveal a loose connector?
Will try it next time