Is there any difference in output to a cab when using an studio profile with monitor cab off (in output menu) vs a merged profile? Basic question, but I want to hear it from you guys, thanks.
![](https://forum.kemper-amps.com/wbb/images/avatars/19/2646-19c4862a9d5516857427663f55103c211353e987.jpg)
Studio Profile with monitor cab off (in output menu) vs Merged Profile
-
Splatter Rod -
April 11, 2020 at 4:22 AM -
Thread is marked as Resolved.
-
-
Is there any difference? That will likely depend on the specific Merged Profile vs. its equivalent Studio Profile. You may like one or the other better - that will also depend on the guitar cabinet you are using.
A Merged Profile is created using a Direct Amplifier Profile and the cabinet module of a Studio profile made of the exact same amplifier with the exact same settings. If you turn the cabinet module off in the Merged Profile (or turn Monitor Cab Off in the Output Menu), the cabinet module is simply removed - you are hearing the original Direct Amplifier Profile.
If you turn the cabinet module off in a Studio Profile (or turn Monitor Cab Off in the Output Menu), the Kemper makes a software-based determination to remove the sound of the cabinet module.
-
Yes. With the merged profile and the cabinet off, you're using a direct profile of the amp and it is the most accurate amp profile with the cab off.
When you turn the cabinet off on a studio profile (as mentioned above by paults) the Kemper makes an approximation of what part of the profile is the cabinet is. Honestly, it's fairly close to perfect, but NEVER 100%. It will always sound different than the direct profile with no cabinet, in my opinion.
Now where it gets really interesting is when you play a merged profile with the cabinet 'on' through full range speakers or direct to recording. The merged profile is created by copying the cabinet module from a studio profile (and using Kemper's software approximation to decide what part to copy) and then pasting it to a direct profile and combining both. The merged profiles can be great for live use, but won't ever sound as good as a pure studio profile in my opinion. Again, the algorithm used by Kemper to approximate the cab is close to perfect, but not 100%, so the merged profile (direct profile plus cabinet) never sounds quite the same as the original studio profile in which the merged profile was created from.
So to answer your question again, yes, there's a difference.
For the most accurate profile without a cabinet module (to be played through a guitar cabinet with a clean power amp), use a direct profile or a merged profile with the cabinet off.
-
Great info. Thanks, guys.