Mesa boogie mark 3, Rectifier 2x12, sm57+md421

Thumas · March 7, 2020 at 7:56 PM

Hi!

Just bought a md421 microphone and did some profiles with my trusty mesa mk3 red stripe, all profiles are md421 with sm57, nice combo!

Sharing both studio profiles and merged profiles, 1-6 are with same amp setting, just different volumes on mics, small changes, 10-12 are new mic positions for both mics and a new amp setting.

I'm happy with these and gladly share the profiles with you.

Update.

Did some new profiles with my new earthquaker plumes ts pedal, 3 profiles in mode 1 and 3 profiles in mode 2, studio and merged, also included 1 di profile with a raised 750hz slider to suit leads a little better.

Mic positions is new since first batch, but are the same on all plumes profiles, just different mic volumes.

Ibot39 · March 7, 2020 at 8:07 PM

Thank you!!!! Very good profiles! Very, very good

alecdreano · March 7, 2020 at 9:13 PM

As it is said, excellent work, i've just tested it and it sounds like hell, thanks for your work !

deadman42 · March 7, 2020 at 9:16 PM

Thanks for taking the effort to make these and for sharing them here. Cool thing

JuLai · March 8, 2020 at 9:25 AM

Bookmark’d, thanks!

tc7four · March 8, 2020 at 1:19 PM

Thanks for the amazing profiles. Will try these tomorrow but the old ones, hell I have to say that they are some of the best I have ever tried. I appreciate the time and effort you put into this. Enjoy the rest of the weekend!

SliderJeff · March 9, 2020 at 3:10 PM

Thanks for sharing!

spikey · March 9, 2020 at 7:15 PM

Nice n tight! Thanks

Mookytc · March 9, 2020 at 9:54 PM

Quote from Thumas

Hi!

Just bought a md421 microphone and did some profiles with my trusty mesa mk3 red stripe, all profiles are md421 with sm57, nice combo!

Sharing both studio profiles and merged profiles, 1-6 are with same amp setting, just different volumes on mics, small changes, 10-12 are new mic positions for both mics and a new amp setting.

I'm happy with these and gladly share the profiles with you.

Thank you!

Thumas · March 15, 2020 at 12:54 PM

Updated first post with profiles with my new ts pedal, earthquaker plumes.

Ibot39 · March 15, 2020 at 6:45 PM

There is a lead profile (MK3 57+421 TS D34 LEAD) that is missing a cab

The profiles are really great again. They sound tight as f**k and cut like a hot knife through butter. But at the same time they are meaty and have weight and body like a sumo! It's a mystery It's like modern, old-school, djenty, thrashy and classic metal tone all in one.

Different flavour and gain settings, but all with the above mentioned high recognition and quality.

I can't believe they are for free - thank you again!

Thumas · March 15, 2020 at 7:55 PM

Thanks for your kind words

D34 Lead profile is just a di profile, i never did any studio profile with that exact setting, my thought was to use the di with one of the merged cabs, load the di profile and then lock the amp and click on the merged profiles to find what cab you think suits best, most of my merged cabs should work well.