Display MoreI'm missing something or being an idiot...
I click on Performance 13, and click on rig 3
It's using Mod "Air Chorus"
I click to change it to "Rotary Speaker" and up the volume a bit. Sounds great.
I then click on the bottom right "Store Performance in #13"
It doesn't stick. I go to another perf/rig and come back, and perf 13/rig 3 is back to "Air Chorus".
If I do this on the Kemper, it sticks.
What am I doing wrong or missing?
I had the same issue. I feel like I’m doing something wrong though.
Rig Manager 3.0 Beta Release Discussion Thread
-
paults -
December 6, 2019 at 2:09 PM -
Thread is marked as Resolved.
-
-
On my Windows 8.1 computer, everything seemed to install correctly but when I run Rig Manager it looks like it's launching (splash screen, progress bar, etc.) but then it just dies--no error message or anything.
It seems to be working fine on my Windows 10 computer so far.
Kemper guys--let me know if you'd like logs or anything.
-
After an hour - no problem with installation on 2013 Mac Pro running Mojave - this is really impressive. I can understand why this took a while to pull together - there has clearly been a LOT of work under the hood to basic Rig Manager functionality plus this slick intuitive design.
Thanks to the whole team at Kemper. What a product.
-
I'm missing something. RM3 looks like RM2. I'm not seeing the editor stuff at the bottom of the window that everybody else is. I've tried selecting a rig, double clicking a rig, not seeing it.
-
Im trying not to giggle about this being out Waaaaaay before Christmas...
WTH, BRAAAAHAHAHAHAHAHAHAHAHAHAHAHA!
-
I'm missing something. RM3 looks like RM2. I'm not seeing the editor stuff at the bottom of the window that everybody else is. I've tried selecting a rig, double clicking a rig, not seeing it.
It only loads when the Kemper is connected
-
On my Windows 8.1 computer, everything seemed to install correctly but when I run Rig Manager it looks like it's launching (splash screen, progress bar, etc.) but then it just dies--no error message or anything.
It seems to be working fine on my Windows 10 computer so far.
Kemper guys--let me know if you'd like logs or anything.
Same thing happened to me.
I had to unplug then reboot a few times but it finally worked.
-
It only loads when the Kemper is connected
Thanks, I just plugged the laptop into the Kemper and immediately, I saw that. I like that the deeper parameters of the rigs are right there to tweak. I can't always remember how to get into tube bias and so forth.
-
The new RM build installs and runs OK from a clean install (no previous RM2 install) on a borrowed Win 10 machine but on the Win 8.1 machine I was planning to use it on (previously had RM2 on it) , RM3 beta crashes at the end of its startup routine.
The Windows error message fingers the editor (Appcrash, Rigmanager.exe) each time. I tried a repair install and rebooting - no dice. The crash happens without the KPA attached.
-
Running Mac OS 10.12.6
Movement of the physical Knobs on Kemper animates in the editor, but mouse dragging on a virtual knob sees the cursor disappear and not make changes.
-
Must just be me, I've not only had no success updating, but I've needed to reinstall everything back to OS 7.15. and RM 2.3.14. Major nightmare. (iMac OS 10.15.1)
RM 3.0 crashed every single time, Would open briefly, then crash. Even when only updating to OS 7.17, keeping RM at 2.3.14 none of my performances or other custom settings were found. Fortunately, I'd backed my Profiler up on a USB stick, otherwise everything would have been lost. Even trying to restore from my RM backup failed.
I'm back to OS 7.15 and RM 2.3.14 and things are back to where I started. Dunno why I'm having no luck. For others considering an update, make certain everything is backed up, not just RM but your Profiler.
Too bad, I had major hopes for this.
Your experience mirrors my own.
-
Windows 8.1 still qualifies for the free Windows 10 upgrade, get details here:
Free Windows 10 Upgrade, from Window 7 or 8.1 - For RM 3.0
I installed RM 3.0 on Window 10, and used the USB stick to install the 7.1.7 OS. RM 3.0 works great, loving the new accessibility! Thanks Kemper Team!!
-
Windows 8.1 user, cannot open RM 3.0.
-
Thanks for all your feedback so far - be assured that we read them all and will try to iron them out.
-
Has anyone figured out a way to edit morphing parameters through the editor? I can see the morphing parameters on the screen but there doesn't seem to be anyway to edit the morphed parameter or to initiate new morphing. When the parameter is adjusted, the unmorphed indicator (red dot) moves.
I can imagine this may be a feature in development - it certainly would be handy - but wanted to make sure I am not missing something.
Thanks,
Fred
UPDATE:
Never mind, I figured it out: cmd-click on any parameter to create a morph or edit an existing one. Great stuff!
-
Initial thoughts: looks good, does what it needs to do.
Issues so far:
- Somehow the midi assignment of one of my presets was changed to another one, probably because RM stored the previously used preset into the one I wanted to load up and something went wrong (user error most likely).
- The loaded amp does not always reload properly in the right hand side of the screen (hence my user error, probably)
Requests:
1 - Ability to select the amp through pull down list, like with the effects
2 - Ability to select the cab through pull down list, like with the effects
3 - Ability to double the knobs and manually enter a number
4 - Ability to edit midi cc assignments
-
Hey ho,
Windows 8.1 64 Bit
installed the OS 7.1.6.15552 and this morning the OS 7.1.7
My Editor screen looks like the picture below, and I can reproduce an Error Message by clicking on "Windows".
Sometimes(!!) Kemper tries to synch rigs, but the screen never changes.
Redownloaded and -installed a couple of times, doesn't seem to help.
-
Initial thoughts: looks good, does what it needs to do.
Issues so far:
- Somehow the midi assignment of one of my presets was changed to another one, probably because RM stored the previously used preset into the one I wanted to load up and something went wrong (user error most likely).
- The loaded amp does not always reload properly in the right hand side of the screen (hence my user error, probably)
Requests:
1 - Ability to select the amp through pull down list, like with the effects
2 - Ability to select the cab through pull down list, like with the effects
3 - Ability to double the knobs and manually enter a number
4 - Ability to edit midi cc assignments
I'll add one more request to this list:
5 - Ability to option-click on any parameter to return it to 0 or default setting.
-
I'll add one more request to this list:
5 - Ability to option-click on any parameter to return it to 0 or default setting.
Right-Click on the knob.
-
Must just be me, I've not only had no success updating, but I've needed to reinstall everything back to OS 7.15. and RM 2.3.14. Major nightmare. (iMac OS 10.15.1)
RM 3.0 crashed every single time, Would open briefly, then crash. Even when only updating to OS 7.17, keeping RM at 2.3.14 none of my performances or other custom settings were found. Fortunately, I'd backed my Profiler up on a USB stick, otherwise everything would have been lost. Even trying to restore from my RM backup failed.
I'm back to OS 7.15 and RM 2.3.14 and things are back to where I started. Dunno why I'm having no luck. For others considering an update, make certain everything is backed up, not just RM but your Profiler.
Too bad, I had major hopes for this.
I've updated to the beta version OS and RM and didn't have any issues (MacOS Catalina 10.15.1). I found bug though:
Rig Manager 3 is available for testing ?
... and I've reported it to KPR support
-