Hey folks, somebody's got an idea on how to do that? With trem I can't do that right now cause it lacks the needed parameters.
Any idea how to replicate a kill switch?
-
DirtyScofield -
January 13, 2019 at 5:51 PM -
Thread is marked as Resolved.
-
-
Do you have the kemper remote?
You may be able to do it by having a morph setup with rig volume at 0 and 100% at each end, respectively - and then setting the morph time to as short as possible, using the remote's rig button rather than an expression pedal.
-
I want to use it à la Tom Morello, forgot to mention... What I need to do is too fast for clicking or use the toggle switch on my LP.
If I would want to just mute, your setting would be ideal though.
-
what about some delay? I once got something like a fast kill switch using a delay. It was by accident though.
-
Ok, worth the check. Maybe by getting the dry mix to 0 with repeats very fast I could get it.
-
I would do like Michael suggested. Set a rig with volume 0% and 100% and morph between them. For really fast use I would set the Remote Switches to Momentary then you could kill the signal when you tap the button and have it return when you lift your foot off. Should be able to do that super fast if you want.
-
You may struggle to do this quick enough on a foot switch, unless you can set it to momentary ( is this possible??)...you really need to toggle with a LP type set up for Tom Morello
-
Agree V8. Push/Push on the footswitch is a big ask. I am pretty confident that assigning to momentary is possible and should work nicely (although I haven’t tried it yet. I’ll give it a go tonight.
-
Empty loop stomp?