massive sound problems since 2 weeks

Hurricane · September 3, 2016 at 4:47 PM

o sorry: ....while Holding softknob 1 (just right next to the type-Knob)

EdRaket · September 4, 2016 at 6:46 PM

It sounds to me there is something wrong with your Kemper Unit. If I were you, I would replace it and discuss guarantee with support.

Hurricane · September 6, 2016 at 8:43 AM

That's what I did.
Currently it seems, that it's a Problem in the Output-section. I was recommended by the Support to unlink all but one of the Outputs to the Master-knob. Since OS 3.x These Problems occured when several Outputs are linked to the Master-Knob.
Additionally I can use the "init-global" function, to "reset" the Problem.
Actually don't know which Parameters are resetted by this, so I still hesitate to do this.

Kemper Support #1 · September 6, 2016 at 9:00 AM

The Init Globals function resets the input and output menu parameters to their factory default values.
Rigs and performances are not altered by it.

Hurricane · September 6, 2016 at 11:20 AM

Thanks for your reply on this and your PM from just right now.
I will follow the hints and redesign my Output-Scene.
So my Problem should be solved. Otherwise I will Report again.