Sorry , but it seems to be impossible.
The Rotary cannot be assigned once more to a different effect-Switch. neither in slow-mode nor in fast-mode.
Please explain step by step how this can be done : "Assign another one to slow/fast"
Sorry , but it seems to be impossible.
The Rotary cannot be assigned once more to a different effect-Switch. neither in slow-mode nor in fast-mode.
Please explain step by step how this can be done : "Assign another one to slow/fast"
1. you assign the rotary on/off to an effect button on the remote (button I f.ex.)
2. page 1 of the Rorary effect screen push and hold soft button "rotation speed" and on your remote press another effect button (buttton IIII) to assign it.
here you go...
The Rotary cannot be assigned once more to a different effect-Switch. neither in slow-mode nor in fast-mode.
Please explain step by step how this can be done : "Assign another one to slow/fast"![]()
1. You need to assign rotary on/off to one of the switches I-IIII.
2. You need to assign slow/fast IN THE ROTARY MENU to another switch I-IIII (by pressing the slow/fast button IN THE ROTARY MENU and the switch simultaneously as usual).
Does it work now? I do this all the time
Ahh, that's the clue and not too complicated !!
Functions really well. And even the programmed ramp-time is valid, KNORKE !!
Thanks a lot for your help.
Ahh, that's the clue and not too complicated !!
Functions really well. And even the programmed ramp-time is valid, KNORKE !!
Thanks a lot for your help.
Great! We should say KNORKE more often here!
Great! We should say KNORKE more often here!
If you're going to say KNORKE more can you let me know what it means? Forgive me if I'm missing something obvious but, as I'm English, I barely speak my own language let alone anyone any other
@Gary_W: Hehe, difficult to translate even in German. It's a rather old- fashioned way to say 'totally fuxxxng awesome'.
OK, cool - Thanks for the education as a day where you learn something is a good day I think
We have the term 'Norks' here in the UK which is an old fashioned and politically incorrect way to describe breasts.
So I guess it means 'totally fuxxxng awesome' here too
@Gary_W: Hehe, difficult to translate even in German. It's a rather old- fashioned way to say 'totally fuxxxng awesome'.
And even this only gives a slight hint, what I really mean
Greetings, Ingolf et al.
Thanks for this post. I was able to program my remote to do this, thanks to the advice offered above.
One step that was a bit confusing was programming Button IV on the remote for the speed. There was no indication that the speed had changed while programmed the button. Yet, when I Stored and pulled back out of the procedure, it had worked fine. The only "hitch," at least in Profiler 3.2.1 software, is that there was not an indication that button IV had been programmed.
Works great!
Merry Christmas and Happy New Year to all.
Doug
St. Paul, Minnesota
USA
Thanks for the info. I just started using Rotary on a song and hadn't had a chance to figure out setting the speed
FYI- Thanks for this info guys- I know its an old post but this should be a sticky!