Posts by rkaynan

Who has, and is willing to share, the exact settings for a Kemper delay plugin to give me real solid stereo for direct to PA. Something that doesn't sound chorusy but realistic as if two guitarists were playing in unison. I messed with it for about an hour today but it just sounds off. Thanks.

I have never used my Kemper any other way. It's always been great.

Please consider adding a High Cut and Low Cut option to the Output EQ plugin.

I'd like to record out of my Kemper via SPDIF but my interface doesn't have that input.
Is there some device that'll go from a SPDIF to a USB input?

I won't be too much help but I have the same issue using a Behringer FCB1010 pedal. I worked with Kemper Tech Support for over a month though we never concluded what the issue is. It's insanely frustrating because for quite a while it was happening to me on stage. I'd have to turn the Kemper off and back on in between songs. That is a LONG minute in front of a crowd. Since I did the following, it hasn't happened and that's over the past two weeks and four shows: At the end of each set, I just turn the FCB1010 off and back on. Maybe I'm just being lucky but so far it works. Good luck to you.

FYI, the volume changes I implemented to the cabinet during my system 3.3 days are now showing in the "amplifier" slot since I upgraded to 5.03.
I'm glad Kemper elected to not discard them.

Today I ipgraded from system 3.3 to 5.03. Everything seems fine except one minor thing: Prior to upgrading, most of my rhythm profiles had a .5db increase in the cabinet selection that was a minor update over time done to round out the difference between them and my solo profiles. The cabinet selection no longer has a volume option. I'm just curious whether or not that minor volume increase is represented elsewhere or did I lose that extra volume. It's subtle and would rather not redo all of them.

I was asked to clarify my specifics:
Firmware is 3.3 using Performance Mode with a Behringer FCB1010 with no proprietary chip.

I used the kemper at a gig last night and had a handful if issues where pressing the pedal changed the profiler to a different patch. I'm not sure what to do. I'm not used to having to worry about incorrect profiles happening.

Quote from sambrox

What FW are you running and is the FCB chipped?

I'm not clear what "FW" is but I use a Behringer FCB1010 pedal without the special chip. That has worked fine for well over a year until recently.

I noticed over the past month that my patches aren't always changing as seamlessly as they used to. Sporadically there's lag or it doesn't change at all. I don't know if it's the Kemper or the FCB1010 board. I swapped the midi cable just to be sure. That's not the problem.
Short of doing a system reboot, any easier ideas? Thanks.

Rock solo harmonies...no good at all. Just don't sound the least bit realistic.

No need to buy the chip. What you should get is program app for the FCB. I bought IFCB. You do all of your programming for the pedal on your computer and then you transmit those setting to the FCB. The FCB is a chore to program by itself and I gave up trying. You can use the FCB1010 on either browser or performance mode but I find best is that you commit yourself to one or the other.
You can get IFCB here:
http://www.wabbitwanch.com/iFCB.html

A shut down and restart fixed the issue. I'll try to remember that next time.

I downloaded Rig Manager 1.5 Mac Release V5 twice but can't get to the installation process. When I try to open up the download, it just sits there verifying the file endlessly. Anyone have a clue what the problem is?

Maybe the noise gate knob is turned up too high? That'll do it.

I'm a straight to PA guy.

I tried this rig but don't get any of that modulation that is present in the soundcloud clip. Would like some help.
Thanks.

i request the ability to record digitally from the USB jack. My interface doesn't have SPDIF.

I've been successfully using an FCB1010 without any of those 3rd party firmware options with the Browser mode.
I finally decided to experiment with the Performance mode but am stuck.
Can the performance mode be used effectively with the FCB1010 without a firmware update? If so, how do you get the midi program changes to correctly pick the correct performances, etc. I programmed the pedal a number of ways but the performance mode jumped all over the place.