Your Profiler will connect to RM running 7.0?
Yes, with Win7 x64 even, I had sync problems at first, but switched to Perform-mode and it worked fine after that:
Your Profiler will connect to RM running 7.0?
Yes, with Win7 x64 even, I had sync problems at first, but switched to Perform-mode and it worked fine after that:
Yes, with Win7 x64 even, I had sync problems at first, but switched to Perform-mode and it worked fine after that:
I’m on a Mac running High. Sierra.
No bueno.
EDIT: Problem turned out to be PEBKAC.
I just needed RM 2.3, but since someone didn’t check the box to see beta releases in RM......¯\_(ツ)_/¯
Mac always seemed to have trouble with RM, for one reason or another, sorry to hear that.
Here's what's new according to the Official Change log:
QuoteDisplay MorePROFILER Operating System 7.0.0.14828
Audio
fixed: Rig X-Fade Time issue
User Interface
added: integrated effect select screen including effect category, type and preset selection (TYPE & BROWSE)
added: Replace/Store As/Rename menu when storing effects presets
added: display name of effect preset recently loaded
added: power meter for models with internal power amp (PROFILER PowerHead™ and PowerRack™) on page Power Amp of Output Section
added: Input Noise Gate received an additional soft knob in the Input Section and can now be morphed. Consequently, Reamp Sens moved to a new second page.
added: export all effect presets to USB memory stick (folder Shared)
added: function to delete all snapshots at once
added: holding UNDO/REDO withdraws/recovers all edits
added: Performance Up/Down can be assigned to analog switches and corresponds to Performance Load setting
added: assignment of Up and Down buttons of PROFILER Remote can be switched
added: Morph Button can be controlled via MIDI CC# 36
added: <PAGE> can be used to navigate through Slots of Performance similar to left and right buttons of RIG Navigation Cross
changed: MorphPedal to Wah and MorphPedal to Pitch activated by default
changed: soft button label External Storage changed to USB Stick
changed: Wah Pedal and Pitch Pedal follow Morph Pedal controller more tightly, if linked.
changed: global option Group of 5/Single Rig maintained during restart
fixed: accidental Rise Time when triggering Morphing via Rig Buttons
fixed: accidental Transpose value displayed in Rig Settings
fixed: analog switches with Rig Up/Rig Down assigned not switching between KEMPER amp and reference amp in PROFILER Mode.
fixed: accidental locks after returning to Browser Mode, if Rigs were selected in Performance Mode before
fixed: Performance scrolling continues, if Tuner Mode gets activated during scrolling.
fixed: storing Rig previwed via Rig Manager overwriting Rig loaded before
Known Issues
The function "Factory Presets" is still missing.
Morph settings not immediately audible, but require a move of the Morph Pedal.
I really like the new Category>>Type selector for the effects, it's so much easier to get to where you want to be.
Beta update seems to have went well, however, preset management is not working via hardware or software.
Updated RM and Profiler from macOS 10.14.6 (MBP 2017). My profiler is pretty much at capacity w/ almost 1000 profiles (yeah, I know). At any rate, the updates generally went OK, but received "Some items in PROFILER are damaged ...." message when connecting to RM 2.3.1/Profiler 7.x. Did the recommended Profiler off > wait 10 seconds > BROWSER/RIG hold for at least 30 seconds deal. I did set to PERFORM as mentioned earlier in thread, but got the same message. Unplugged/plugged back in set to BROWSER and sync completed w/ out issue (it appears). No issues connecting my Mac/RM to Profiler other than USB-C > USB adapter can be a bit sketchy in general (prior to updating).
Beta update seems to have went well, however, preset management is not working via hardware or software.
Do we need to install factory presets?
Do we need to install factory presets?
The option is no longer where it used to be or I'd try.
The option is no longer where it used to be or I'd try.
Thanks. Just waiting for mine to update and I'll look as well
Wow... it's rebooting and I've never seen the screen look like that... strange flickering on a screen I've never seen before
Wow... it's rebooting and I've never seen the screen look like that... strange flickering on a screen I've never seen before
Mine did the same.
Beta update seems to have went well, however, preset management is not working via hardware or software.
Did you update to RM 2.3 beta? As soon as I did, the factory presets appeared in RM. Similar to Rig packs.
Did you update to RM 2.3 beta? As soon as I did, the factory presets appeared in RM. Similar to Rig packs.
They're there, however, cannot be selected/loaded. On the hardware I can scroll through the PRESET column, however, not CATEGORY or TYPE, as seen when CK demo'd. The rows are there and the implementation very welcome, just not working properly for me currently.
Is FACTORY PRESETS soft button available for anyone else? Manual says it should be there, however, it's not on mine.
I installed through RM, updating RM software first, then firmware. I'm on Win7 PRO.
They're there, however, cannot be selected/loaded. On the hardware I can scroll through the PRESET row, however, not CATEGORY or TYPE, as seen when CK demo'd. The rows are there and the implementation very welcome, just not working properly for me currently.
I installed through RM, updating RM software first, then firmware. I'm on Win7 PRO.
Is there a soft button at the left mike this? Hitting that toggles category or type.
Is there a soft button at the left mike this? Hitting that toggles category or type.
There's a soft button for toggling TYPE<->CATEGORY and it seems to change. The knobs below TYPE, CATEGORY, PRESET are not scrolling the above list, though. Only way the preset changes on the hardware is turning the BROWSE knob and it scrolls through the PRESET column.
Impossible to update to version 7.0 without USB stick? Or it's will available later?
Update through usb worked just fine for me.
There's a soft button for toggling TYPE<->CATEGORY and it seems to change. The knobs below TYPE, CATEGORY, PRESET are not scrolling the above list, though. Only way the preset changes on the hardware is turning the BROWSE knob and it scrolls through the PRESET column.
That’s the correct behavior. Type knob to select effect category, then effect type. Browse knob to cycle the preset column. The knobs below the screen are not active. Load preset or auto load at top right.
There's a soft button for toggling TYPE<->CATEGORY and it seems to change. The knobs below TYPE, CATEGORY, PRESET are not scrolling the above list, though. Only way the preset changes on the hardware is turning the BROWSE knob and it scrolls through the PRESET column.
Same here
From the 7.0 Beta Changelog:
Known Issues
The function "Factory Presets" is still missing.
Does that mean they know it's not working, entirely? Is this intended, based on what's to come?
Locked up the Profiler hard using the RIG navigation cross ... lights out on remote w/ Profiler locked up. Turned the dial to off and nasty pops through the amp. Powered back up and good to go. Beta life.
From the 7.0 Beta Changelog:
Known Issues
The function "Factory Presets" is still missing.
Does that mean they know it's not working, entirely? Is this intended, based on what's to come?
Nice find. Thanks for posting. I’ve no idea on answering your question, though.