Am I the only one having this issue? I am trying to import some profiles from my usb stick, same as I have for the past few years, and now that I am on 2.7.4 I am having an issue where my usb stick is flashing but nothing is transferring into the KPA.......I am at about 700 profiles so I know I'm below the limit.
![](https://forum.kemper-amps.com/wbb/images/avatars/05/2452-0561eb60922ac92094c6f772bfe2bc55c03a042b.jpg)
Can't Import Profiles from USB stick KPA in 2.7.4
-
musicianof1 -
December 20, 2014 at 6:38 PM -
Closed -
Thread is marked as Resolved.
-
-
Moved up to 2.8 beta and still the same problem. I can't import via USB. This is a problem now that I want to import cab files as Rig Manager only imports rigs. I know the usb stick works in my computer and it worked to upgrade firmware, so what gives?
-
Anyone?
-
I had the exact same problem, I had to pull from the Rig Manager. I also heard somebody else had the same problem and they switched to another usb slot on the back.
-
Update: I left the studio for about 20 min or so and left the usb stick while it was still flashing and when I came back it finally loaded the 4 kipr files. So I guess it works if you have eternity to wait.
-
I also have the same problem. I am on 2.7.4 and I can import some profiles but some won´t upload to the KPA. Really enoying!
-
maybe a dumb question: did you try to format the usb memory from scratch after updating?
i was on 2.3 prior to update the new fw and had some errors on a memory that was flawless. when willing to update I copied the 2.7.3 kaos file into it but wasn't recognized. I formatted the usb again and everything worked again.
when formatting always remember to back the content up, ok?
michael
-
It seems OK in 2.7.4 for me, but since I started using Rig Manager I haven't plugged it up.
My thumbdrive was formatted by 2.7.4 so that might be the issue.
-
I was able to move back and forth between firmwares so I don't believe my usb stick is the problem but then again, who knows.
-
so did I: I have used the same usb unit for all the fw updates, but this time something happened that made me reformat the usb again. if you backup what you actually have in your usb memory, it'll cost you nothing to try to format it to ground zero
-
I know you said you are around 700 profiles but for trouboleshooting purposes maybe copy all your profiles to RM and delete whats on the KPA and try to import. I had the exact same issue but mine was due to having over a 1000 profiles on the KPA. I know when I did the upgrade I had to import all the rigs on the KPA, they were on it but didn't show up until I did the import.