Posts by jojo
-
-
OS 2.3.0 Performance Autoload problems
using the FCB with UNO4K
Perf. Autoload enabled is o.k. (change performance start in slot 1)
Perf. Autoload disabled works only with bank down - bank up autoloads slot 1
bank down only shows the new performance number on the kemper screen, not on the FCB
->>> please show all the information in the kemperscreen when the next
performance/rig is in standby (may be with an other backgroundcolor)Perf.Autoload is allways enabled when the kemper starts new.
-
using the FCB with UNO4K
Perf. Autoload enabled is o.k.
Perf. Autoload disabled works only with bank down - bank up autoloads slot 1
bank down only shows the new performance number on the kemper screen, not on the FCBplease show all the information in the kemperscreen when the next performance/rig is in standby (may be with an other backgroundcolor)
Perf.Autoload is allways enabled when the kemper starts new.
-
my try´s to create feedback-rigs
https://www.dropbox.com/sh/rldlrg7qllqix3v/HNkNtRvxmT
with the wha-pedal you have to modulate the feedback
-
Btw:
Who bought their Profiler at an "analog" store?
Or who tried to do so?
How was your experience?ich habe im juni 2012 versuchet über die musikkiste in peine einen zu bekommen, die haben gleich 2-3 bestellt, aber leider nie einen bekommen, habe ihn dann, nach einem monat warten, bei just music in hamburg erstanden (hätte aber auch gern meine musikalienhändler des vertrauens den deal gegönnt)
-
Hi,
ich habe seit ein paar Tagen einen neuen FCB1010 mit dem Uno4Kemper Chip.
Trotz Kalibrierung der Pedale habe ich zwei Mängel festgestellt.
Die Lautstärke ist dem rechten Pedal und das Wah dem linken Pedal zugeordnet.
Beim Volumenpedal fällt mir auf, dass kein fliesender Übergang von leise auf laut vorhanden ist. Das Pedal springt förmlich auf laut.
Bei der Hälfte des Pedalweges hat man schon 100% Lautstärke erreicht. Ein sauberes Arbeiten mit der Lautstärke ist m.E. so nicht möglich.Das linke Pedal sollte dem Wah zugeordnet sein.
Bisher habe ich es aber nicht hinbekommen, einen in der Stompsektion aktivierten Wah Effekt dem Pedal zuzuordnen.Muss ich noch etwas beachten o. mach ich etwas falsch?
hi fender,
wenn du das fb1010 einschaltest, wärend du taste 1 + 9 gedrückt hälst wechsteln die pedalfunktionen
hier git es noch mehr cheats und eine interessante bedienungsanleitung:
http://www.uno4kemper.com/uno4kemper_downloads.php
hat sich dein 2 sekunden problem schon erledigt?
hatte was ähnliches (bis 5 sek) und wollte dir ne ausführliche PM schicken, hast du aber nicht aktiviert. -
-
Clear your Cookies and relogin, I think it's a cookie problem.
hi kermandosn´t help, sorry
but if i select the "remember me" box it works
thank you
-
hi kerman
tried to download - didn´t work
when i´m locked in here: http://www.evergladesaudio.com/audio-apps-plu…iler-preset-hub
an select one rig like: http://www.evergladesaudio.com/audio-apps-plu…v-mark-triple-6
i´m automaticly locked out, and if i try to lock in here i get this message:
"The most recent request was denied because it contained an invalid security token. Please refresh the page and try again."
-
hi kerman
thanks for building this
(adjusted the threadname accordingly)
but i can´t open the registration-link
dosent work with my firefox-browser
do i neet e special plugin?it create some rigs with special effect settings (like Freeze or Sustainer/Feedbacker)
with the kemper (erverybody knows) it´s possible to take them over to every rig you want (or to store them separately)
is it possible to make separat categorie for effects(-ettings) (May be cab´s and so on)?thx jojo
-
Order in for me too - got the stickers too!
me too -
thanks for quick answers, but:
I'd do a system reset and look if the sluggish behaviour stops.
didn´t make it (same problems as before (switching between BROWSE an PERFORM up to 10 sekonds)
Please make a backup and contact support, attach the backup.
did it, have to wait for answer
thx again
-
since i updated to firmware 1.8.0 public beta (the release an the 2.0 also) i have problems with the handling:
if i use a button or knob to switch / select / browse something, often it take up to 5 second until the kpa reacted.with all the previous versions it wasn´t so.
( two times in the last weeks an error with the "system-clock" or so was displayed - i ignored it and nothing else is happend)
any information or help
-
this is the current site
to get the chip (soon)"Hold on please, at this moment we are setting up our tiny web shop to
allow ordering the firmware chip online. We hope to have this ready by
June 15. Thanks a lot for your patience!If you didn't register to receive notifications yet, you can still do this:
just send a note to info@kemper-fcb.com
Beware that this email address will be deprecated as soon as the
final release notification will be sent around, by the end of this
week. " -
Quote
- Tag system so the user can tag the profile for a better search experience.
- Preview, a little mp3 previewing the profile, also may be interesting to place a DI so all the previews have the same playing.
- Categories: God! why there are not categories? I have to navigate through more than 150 pages!!
- Pictures or icons so the different amp types can be quickly identified, also the effects used, etc...
isn´t it possible to built/start a "private" (not kemper) webpage with a parallel rig-exchange with all the "kerman"features?
everybody can offer his own rig like he wants (commercial or noncommercial) - and if you do not import rigs from an other site/exchange, whats the problem - means everybody can uploads his own rigs like in the kemper rig-exchange in the new one too.if the kempers don´t answer/react please do it kerman
i would love it(if it works, may be the kempers will integrate it)
-
I started downloading rigs from the exchange section...ufff as a web developer I have to say that this can be improved a lot.
- Tag system so the user can tag the profile for a better search experience.
- Preview, a little mp3 previewing the profile, also may be interesting to place a DI so all the previews have the same playing.
- Categories: God! why there are not categories? I have to navigate through more than 150 pages!!
- Pictures or icons so the different amp types can be quickly identified, also the effects used, etc...I offer myself to create a site, I don't know if webmasters here are working already on this, but if not, I can start a site, but I will need support from the users, I will not download all the profiles and upload in other site, that's not fair.
So if you are interested post here your thoughts.. just want to have a efficient and cool tool for this...dawn why kemper site is so "old fashioned"? vintage doesn't apply to websites!! hjehehehe
+1 -
play a note/chord turn the Delay-MIX-Konb on (try 100%) and back to 0
(the Delay turns automaticly from off to on)
stop the freeze by bushing the Delay-Button to off2 freeze-rigs:
dropbox link
https://www.dropbox.com/sh/rldlrg7qllqix3v/HNkNtRvxmT -
-
EH Freeze
(electro Harmonics)build 2 freeze -rigs
dropbox link
https://www.dropbox.com/sh/rldlrg7qllqix3v/HNkNtRvxmT</a>play a note/chord turn the Delay-MIX-Konb on (try 100%) and back to 0
(the Delay turns automaticly from off to on)
stop the freeze by bushing the Delay-Button to off -
i build 2 freeze -rigs
https://www.dropbox.com/sh/rldlrg7qllqix3v/HNkNtRvxmT</a>
play a note/chord turn the Delay-MIX-Konb on (try 100%) and back to 0
(the Delay turns automaticly from off to on)
stop the freeze by pushing the Delay-Button to offrefine it and
find a way to do this by footswitch/controller
