My KPA does this intermittently. Sometimes it recognizes them, sometimes not. Regardless of the manufacturer of the USB (3 different brands)
Posts by ACELUEK
-
-
I just ordered my FCB1010 and the Uno4Kemper eprom! Can't wait to get them.
-
Here is the video. You will notice the change as I make adjustments on the Reverb, Gain, Mod then the Volume. The volume is the most noticeable.
-
I did a system reset after I had the issue with the OS upgrade. I will give it another shot. I will do a quick video of the issue if the 2nd reset does not work..
-
When I turn on the Kemper, the gain, reverb and other effects are not heard even though the knob is at somewhere around 75%. All I have to do is slightly move the knob and the effect is then at the correct level. This started after I had issues loading the latest OS revision.
Any help would be appreciated.
-
Using my Epiphone Firebird Bass, Gibson 61 Reissue SG, and Warmoth Soloist (solos).. A friend Bernie plays the drums on this..
https://soundcloud.com/aceluek/straight-through-the-heart-re -
I just had mine lockup.. The only thing that would fix it was initializing the memory. I recorded a video for each of the steps I took. I will post on YouTube for you to view later.
-
Which rigs are good for playing a Bass guitar?
-
I was not impressed at the beginning, but after a few months of learning how to properly use it I love it.. I did install a Solid State Hard Drive so I did not pickup the sound of the old HD motor... This is not unique to KPA, but it help me to be able to not have to relocate my computer far away from where I played the guitar..
-
-
Here is the Youtube video I made and I re-recorded the guitar track..
-
Fantastic demo! Any notable tweaks to the basic rig? I've gotta try this one. Also, I'm curious what pickups you're using your '61. Finally, I wasn't listening too closely outside of guitar and vocals (both of which sounded awesome), but curious if you used a backing track for the rest.
Thanks! I only adjusted the EQ a little bit.. I installed the Angus Sig pickup in the bridge.. I left the Classic 57 in the neck. I did install upgraded pots and caps (PIO) that I bought from Martin Six String Customs, a bone nut, and replaced the bridge and tailpiece with tone pros (aged nickel)..
I was using a backing track with drums, bass and vocals..
-
Uisng the "Marshall JCM800 G:8 - r.u.sirius" rig..
http://soundcloud.com/aceluek/back-in-black-full-song-test-1
-
-
-
Using my new EBMM and the Kemper.. I short test recording with ProTools 10.
-
Only in Europe
! where vacations are the most important thing in life!
I should know..was born there..
Can't imagine an American or Asian company doing that!
The Canadian's are not much better..
-
Do the clicks happen with headphone in the Profiler?
Also try to plug your headphone into the main out and check (one ear only)
Chris,I do not have clicking on the headphone out, and never had. I will check the Main out today when I get home. As a note, both the SPDIF and main outs (analog) were both clicking yesterday and then after about 10 minutes it stopped while I was recording. As of 6 PM last night, there was no clicking. I will recheck tonight after work.
Thanks,
John
-
We are reading the forums, so it is not pushing things forward by sending seven equal messages to our support.
We are aware of that little crackle that can happen on a rig change. This will be cured, but takes a bit of time.
I will have a look at the artefacts over Spdif. I will be out for summer vacations, so allow some time as well for this.Thanks
CKUnderstood.. Thanks. Have a good vacation!
-
I did the memory reset, but still got the crackles, but only after switching patches for a few seconds and then it is fine. I am using SPDIF as well and the soundcard is clock to the Kemper, also I don't think it is cliping since it would happens more often than just after switching patches.
Is this now an official bug or everybody else got it sorted out with the reset?
Man, mine is a constant crackle.. I will communicate this to support today..