Hello friends! I wonder if one day in the next updates you will be able to include this feature: change IR with 2 + - buttons or two arrows
greetings!
Hello friends! I wonder if one day in the next updates you will be able to include this feature: change IR with 2 + - buttons or two arrows
greetings!
No habla Espanol.
Hello friends, first of all I congratulate you on the arrival of the new year 2023, I wish you much health and happiness. Since I updated Rig Manager, I get the annoying "Do not show again" message when I want to remove more than 1 Rig or IR. I turn on "Do not show again" but keep the message asking if I want to delete. Although the active thing keeps getting the message, does the same thing happen to you? Best regards!!
Try shutting down Rig Manager after the delete is completely finished and see if it happens the next time.
Sorry, it's that I copied from the translator and I made a mistake what I wanted to write
Hello friends, first of all I congratulate you on the arrival of the new year 2023, I wish you a lot of health and happiness.
Ever since I updated Rig Manager, I get the annoying "Don't show again" message when I want to delete more than 1 Rig or IR.
I turn on "Don't show again" but it keeps getting the message asking me if I want to delete.
Even though I activate it, the message keeps coming out, does the same thing happen to you? Regards!!
according to our database you have provided the required information (address,telephone number etc) yesterday. Creating the paperwork generally takes about 24 hours. Therefore you should receive the RMA document later today.
They do not give me details of how the shipment will be made, I do not know if they send a courier to my house or I have to send the package, I have been in contact several times via email, but they always tell me to wait, that I know they will contact me.
"my request was sent 2 days ago"
Copy and paste:
please wait for our papers and instructions. My colleague will send you an email.
With best regards, Helge
Kemper Amps Support Team
I have sent several emails to send my kemper for repair but they do not contact me to send it from Spain to Germany, I have checked if I have spam, but they do not contact me, has this ever happened to you in technical support?
I have filled in my data for kemper, but they have not contacted me again, what is the process to send to the technical service?
Yet another video, trying to boot from USB or install from USB
Thank you very much for answering!
if I have opened a ticket, I hope they can repair it, I have been suffering from these blockages and lack of control for a long time, but I have always been able to recover it, but this time it is impossible, it is as if it ran out of its memory or something like that.
Hello
I have been having problems with my Kemper for a year and a half.
I have been solving by reinstalling the system with a pendrive.
but already the kemper system is unstable, it crashes constantly and it is as if the flash memory of the kemper is damaged.
Now it is very difficult for me to install the system again and when it is installed the Kemper crashes and does not react, or the LEDs of the buttons turn off or the buttons react as if they were pressed on their own.
I have been suffering from this lack of control for almost 2 years, but it is already unbearable, I did not expect that my unit would give me so many problems.
I have had all kinds of hardware (line 6 Headrush...) and this is the one that is giving me the most problems.
I have also formatted the system by holding down (System) when starting Kemper but after a short time it becomes unstable.
the screen always shows the message: NO RESOURCE DATA.
and from there it doesn't come out, it's a loop!
I leave you a youtube link so you can see it:
LOL!!
I don't feel like buying a new one, and from here a Kemper 2 is made, I think I'll retire
Hi friends!! hope everything goes well.
The other day I saw a video that with some filters you could change the polarity of the LCD screen of any device, and it would be interesting to get these types of filters to put them on the screen and give our Kemper another personal view.
What do you think of this photo?
SOLVED!!
I have restarted kemper blocking the "RIG" button until it has entered a configuration wizard.
in case this error occurs to someone, try this method, greetings
[Blocked Image: https://scontent.fmad8-1.fna.fbcdn.net/v/t1.6435-9/235698306_1019988325432534_3874213552770604374_n.jpg?_nc_cat=107&ccb=1-5&_nc_sid=825194&_nc_ohc=tEpm9xZD5KAAX96vqQV&_nc_oc=AQl07aQBUVzWPp1_ZWEdbICke4jNo3QCnHFy8Pb2EYeevTv07rbOr3XX1ypH2H4HrJM&_nc_ht=scontent.fmad8-1.fna&oh=7d745107aec7d76a85bb7ccaa6742f42&oe=614416E0]
Hello, I am contacting the technical support, because after updating to the latest version of the OS my Kemper Profiler has been suffering errors and crashes, I decided to do a hard reset deleting all the Rigs and memory to factory reset my Kemper.
and it has not worked anymore, I am attaching a photo so that you can see the error that it indicates to me on the screen.
I hope I can have a solution because I am a poor boy, and I could not buy another Kemper.
Excuse me for my English, I speak very badly, I am Spanish, I hope you can help me, I hope to hear from you, thank you very much.
hola amigos espero que todo vaya genial!
pues me compré Kemper hace unos meses y siempre habia trabajado con plugins para mis grabaciones.
me gustaria saber de que manera puedo crear perfiles de estos plugins VST para tocarlos en mi Kemper.
tengo un interfaces Focusrite 18i20 3GEN y uso Studio One, como debo de conectarlo? es importante manipular algun tipo de volumen de salida de la tarjeta o el DAW?
saludos y muchas gracias de antemano
Amazing!! thanks
Hello friends, I hope everything goes well!
I would like to make a profiler from my Kemper to G-Lab to put it in GE300 and vice versa as well.
but I can't capture Kemper's sound well in G-Lab, I've asked in Mooer forums, but the vast majority don't know how to handle our Kemper.
If you have any ideas on how to connect it to G-Lab well, I would appreciate it very much, so I can also share G-Lab Profilers to the Kemper community.
greetings and thank you very much !!