Hello everyone !
I'm a backline technician and recently started to think about a complete network for the Kemper.
We have 2 Profilers (one main, one spare) and 2 remotes.
I know now that we can connect 2 remotes to one Profiler using a POE switch and use a POE injector for the stage cable (25 meters).
I ordered the references given in the manual and will try this soon I hope.
Now, before I try a stupid thing and burn some gear I wanted to know if it would be possible to hook up the 2 remotes AND the 2 Profilers in the same POE switch ?
Both remotes would be controlling both Profilers at the same time to have them working in parallel, or a perfect mirror in case of failure.
I'm not really an expert of network and POE so I'm worried that if I hook up all those units together would create some power loops or voltage overload, or anything like this ...
The main goal is :
2 Kemper Profilers,
1 POE Switch TP-Link TL-SG1008P,
1 Remote at my feet with a small 5meters cable,
1 Remote on stage at 25meters with a POE Injector TP-Link TL-POE150S.
Is there any potential problem with that network or any danger I should be aware of ?
Thank you very much.
Regards.
Simon