Check in Amp-Section the Direct Mix!
Posts by IngoRockt
-
-
I use this Lehle Switcher: https://www.lehle.com/en/lehle-3at1-sgos
I use different Performances for my guitars and send midi-signal to the Lehle to change the active input. At bottom of my link to Lehle is a video in which is shown how to setup with KPA.
-
Yesterday my Kapsule Duo arrived. Phantastic but not a cheap solution. I ride with my bike to our rehearsal room. So I wanted a solution to go with 2 guitars and my kemper. 2 Guitars and my Stage fits. My ES-335 dosn't fit in the case. The case is made of carbon and looks very stable.
There are 2 compartments for the guitars. The 3rd is on top of the case - usually used to take cables etc. It is big enough to put the stage into.
1st picture: the case
2nd: the upper compartment
3rd: the upper guitar compartment with my Gibson
4th: the lower guitar compartment with my Suhr
-
-
I'm the only one in my band with ears.
Really?
-
Dein Profiler läuft nicht unter Windows, er hat ein eigenes Betriebssystem. Du kannst bei entsprechender Verbindung sowohl mit dem RM für Windows als auf mit dem RM für iPad auf deinen KPA zugreifen.
-
-
Vorsicht beim Anpassen des Amp-Volume. Wenn nach dem Amp lautstärkeempfindliche Effekte platziert sind, dann hat die Veränderung des Amp-Volume Auswirkungen auf den Klang. Meine Empfehlung: Zur Anpassung der Lautstärke das Rig-Volume zu nutzen.
-
What abou this? You can get some cold drinks as well...
[Blocked Image: https://muzikercdn.com/uploads/products/506/50674/thumb_large_d_gallery_base_097ed2f3.jpg]
... but is another bulky item to transport and the drinks must be transported as well...
-
My way:
Performance mode: Slot 1 and Slot 2 with the same Rig but different settings for FX status.
Slot 1:
all FX off
Footswitch 1 - Boost on
Footswitch 2 - Overdrive on
Footswitch 3 - Delay on
Slot 2:
all FX on
Footswitch 1 - Boost off
Footswitch 2 - Overdrive off
Footswitch 3 - Delay off
-
Morphen kannst du auch über die Taster. Schaue dir das mal im Handbuch an. Du kannst du Morphfunktion auf die Slots im Performancemode legen. Zweiter Tritt morpht, nochmaliger Tritt und alles geht zurück.
-
Du kannst das Panorama morphen: von ganz links nach ganz rechts. Wird dann aber ein Steptanz
-
Yes, it was connected to the computer.
How do I turn this "lock stomp effekt" thing off?
I
Disconnecting the computer.
-
A drawer for the toaster?
-
Wie Paults schon geschrieben hat: im Browser-Modus gibt es keine Bänke.
Wenn du Bänke nutzen willst, dann beschäftige dich mit dem Performance-Modus. Dort kannst du 125 Bänke mit je 5 Slots bestücken. Im Bildschirm wird dir dann auch alles angezeigt. Benutzerhandbuch S. 296ff...
-
Just another point - for solo's, why not use a separate rig? I have a rhythm sound that I morph the volume for riffs and to emphasize parts, but for solo's I use a dedicated performance slot. It means I can use a different amp profile as well and voice it specifically for solo's.
So do I.
But sometimes I feel to solo with crunch or clean tone. Then the morph of rigvolume is helpful.
The other situation I use the rigvolume morph: Sometimes at rehearsal the band (drummer) is going louder and louder. For we have no soundengineer in rehearsal I am able to adjust my volume
-
Is it possible to morph rig volume as well ?
Yes, Sir
-
I morph the lead with a pedal so I stay within a RIG ...
Raf
I think you morph amp volume and/or pure booster. I recommend Rigvolume. What have you in the FX-Module?
-
Try Rigvolume to increase the volume. Maybe there is a fx that is sensible for volume. Rigvolume raises volume jut before output.
-
Fast jeder (notenblattabhänige) Gitarrist hat aber heute ein Tablet als Liedermappe. Wenn sich nun die entsprechende Liederbuch-App ohne zusätzlicher Hardware mit dem Kemper verbinden ließe und mit dem Aufrufen des Textes automatisch der dazugehörige Sound eingestellt wird, wäre meiner Meinung nach der Nutzen ungleich höher.
Das ist mit einem Wireless Midi Adapter problemlos möglich. Ich nutze Songbook auf meinem Surface und den Yamaha MD-BT01 Wireless Midi Adapter am Stage. Das sollte auch mit einem Android-Tablett funktionieren.