I’ve had a Stage for a few months now. I’ve been having issues where it will “freeze”. None of the buttons will do anything and there is no sound. To fix it, I have to hold the power button until it shuts off. It seems very random. Sometimes it won’t happen for several days, while one it happened 3 times in 10 minutes. Been through a few of the recent firmware updates and it still happens. Getting pretty frustrated. Any suggestions would be greatly appreciated.
Did you solve your issue ?
Did you solve your issue ?
Any (good ) news ?
That works fine, 
It sounds like you are trying to Morph the Amp Gain control. Since liquid profiles were launched you need to morph the Generic Gain as this range can be greater than the Amp Gain
I'm gonna try this. I'm not quite sure I understand everything about liquid profiling, especially the different types of gain, but improving thanks to you guys.
What parameter is set to morph in the faulty rig?
None.
I was focused on gain control. I checked many rigs in performance mode, and try to morph other parameters (boost, delay, ...) The issue seems to be related to gain control only for some rigs.
Here is the thing : the morph page of the rig menu shows some differences (faulty first, healthy second).
Clear module and clear all doesn't show up at the top, and no morphed parameters.
You can see on the left, the 3 buttons are the same (faulty rig), on the right, the morph button is slightly lighted. It's more obvious by looking directly at the stage.
Thanks a lot Burkhard
Rig button : one of the 5 buttons used to select rigs at the bottom of the stage.
Morph button : just at the top of the triplet : morph, lock, edit, left to the kemper logo.
I used these names according to the users manual.
Should work for all rigs. Have you saved any changes to the rig?
Not sure I catch what you mean ? Both rigs that work fine and those who don't, have been modified several times and saved for month.
I noticed the faulty ones have the morph button completely unlit, then brightly lighted after pressing the rig button, while the others have a slightly lighted morph button at the beginning.
Hi there
I tried to use the morphing, let's say same rig two gain levels. In performance mode, I choose one rig, press the rig button, change the gain then press the rig button again. Then I can switch to two different settings.
That works for some rigs and doesn't for others, don't know why ?? 
Any clue ?
Hi there
Will the amp list for liquid profiles be updated soon ?
Hi, thinking of getting back into kemper after some years away. Am intrigued by liquid profiling, question is can you apply liquid profiling onto older profiles on the kemper stomps or do it in rig manager and save the new rig out to the kemper stomp. I have many hundreds of profiles from when I owned a kemper last..
I don’t profile amps so don’t need that functionality, but am very interested in how liquid profile and how it may contribute into profiles when you only own the remote.
Cheers
Sure you can use your old rigs and select a liquid profile amp from the list. Please have a look at the users manual section "Retrofitting to a Liquid Profile" and follow the procedure.
I have both, with sames rigs. The stage boot is way faster. A guy from Kemper told me the hardware is not the same.
OK. I use the head with a Focusrite usb interface. So, I can adjust the sound level coming from the profiler head to get the good balance between the guitar sound and the signal coming from the computer. I don't know how to mange it using the USB audio function (that's what I do with the stage, no dedicated soundcard). When I try to adjust the levels for all the rigs (meaning not using the rig volume for each rig), both guitar and computer levels change.
So my question is how to balance the two signals, how to adjust them independently ?
Hi there
I noticed the head boot time is way longer compare to the stage. I don't understand as I thought both have the same hardware and software can't be so different.
Any clue ?
I faced a slightly different issue. I copied all my performances from my profiler head to my new stage. It turns out all the rig volumes are higher, don't know why ?? Changing all the rig volumes of all my performances one by one is kind of a P.I.T.A.
Using the Master volume doesn't help cause I use the USB audio function and then the signal coming from the computer change evenly.
I definitely need this global rig volume adjustment.
Seams there's no answer ??
Hi There
I'd like to plug a microphone into my stage. I've read the user's manual, had a look at the USB audio video from Kemper and searched for advice on this forum.
Here's what the manual says :
Recording external audio sources
Additionally, you could use the PROFILER as an audio interface for external signal sources such as a microphone.
For
this application, set Record Source (Rec. Source) to “Return
Inputs” on the PROFILER Head and Rack to feed the signals of the
RETURN to channel USB 1, and the ALTERNATIVE IN to USB 2. Stage users
should set either 1+2 Source or 3+4 Source to “Return Inputs” and
feed the signals of RETURN 1 and 2 to their DAW.
So, I connected my mic to return 1 but in the output section of RM, I didn't find "rec source" shown in the video. Instead there's 1+2 Source and 3+4 Source. I guess this is the stage configuration, so I chose "Return Inputs" in 1+2 Source. I can here the voice only if I use my DAW. Is it a normal behaviour ?
