Hi
I got similar issue and resolved to use n2 S/PDIF cables in out from Kemper and out in on audio interface: Kemper need of
both cables for the right signal synchronize.
I hope this is helpful.
Ciao
Hi
I got similar issue and resolved to use n2 S/PDIF cables in out from Kemper and out in on audio interface: Kemper need of
both cables for the right signal synchronize.
I hope this is helpful.
Ciao
example for reamping
....ah...yes ...then ?
Hi All
I always used the Kemper out for connect it to my audiocard without issues.
After upgrade I get lost connection issue and resolved it after connect, with another cable,
the out of Audiocard with input of Kemper spdif for synchronize the signal.
A doubt : what we can use Kemper input spdif for ? we need of it only for sync signal ?
Ciao
ciao a tutti amici kemperiani , io possiedo kemper stage , io riesco a registrare sentire in cuffia e riascoltarlo una volta registrato in cuffia , pero quando mando in play la mia backing track non ricevo niente dalle casse monitor il che ho i due cavi bilanciati canon alle casse e jack al kemper main out il resto del retro della scarlett 212 ho i cavi per poter registrare , ora volevo collegare un mixer per poter sentire tutto cio datemi un consiglio come coleegare il mixer grazie mille a presto
Se ho capito bene in uscita alla scheda audio non hai collegato niente : ecco perché senti solo dalla cuffia.
Dovresti montare dei monitor in uscita alla scarlett.
Il mixer non serve a meno che devi registrare una band in presa diretta.
Ciao
Hi Guys
In my opinion the best Marsha Collection !
I get all pack and
I wait for other amps.....
Ciao
Beyerdynamic DT 770 Pro 80 ohm is a good choice
I use it with KPA and Scarlet 212
keep on your mind: more impedance is high less volume you'll get
Ciao
Hi
I am italian and I played some of them in the past : are so accurate !
Great impressive job!
Thanks!
Ciao
Hi
You can record Kemper directly connected on your audio interface with a great sound: any kind of hardware is not needed.
Could be improved with spdif connection between kemper out and audio interface in.
Are you sure that cabinet is enable on output ?
Try to cut high frequency usually around 4-5 k for less digital sound...
Ciao
Thank you!
Ciao
Hi
For your Info:
How connect Kemper with Audio card
PS: check Direct Monitor...must be on off....
Then I think if you connect Monitor out (Stereo) on 212 Inputs, you'll listen the headphone out of 212 in mono with sound L+R mixed of course if you'll use a DAW you'll be able to put on left input 1 and on right Input 2 of 212.
The 212 have only drivers and missing a little software mixer for this kind of issue.
Hi
I am so curious to know how Choptones record guitar and Kemper ( or other ) on Youtube:
Direct recording out of Kemper (simply) or Microphones recording (with speakers) ?
Cheers
Hi
Some guys are using a guitar cabinet with great sound:
Harley Benton G112 Vintage is very chip with Celestion speaker 8 ohm.
keep in your mind you pay the quality..
You are using a Kemper: probably is better wait for good choice.
Ciao
For most guitar players makes sense to go back to Cabs as most of us have some lying around, it feels better due to the pushed air from the coils, and the vibration transmited in the room from the heavy mass cabinet. But thats what you lose, soundwise is not too different once you get your eq right. I added a Subwoofer to the 2 Headrush FRFR108 set, and the sound is stupidly big and powerful, it reminds me to the time I used a oversized Mesa 4x12 with a friend trough a matrix amp, it was great with merged profiles, but to get the pushing air, the volume had to go beyond my comfortable listening level for a room (Live is another story I guess). So far, my setup gives me the best of both worlds, not the amount of air for a pushed 4x12, but enough to feel the power on my feet, at a lower more comfortable volume.
That of course is MY ideal setup, as I am not willing to deal with heavyweight cabs and high volume to get a great tone. I have a 2x12 celestion cab which would be a middle ground, but I feel Celestions are not great with all the profiles, I will surely try the Kone, as this would be a awesome proposal to solve my problem of not having a considerable amount of Cabs to mix and match. I guess some people like to match the profile to the CAB they have, but for me is the other way around. So waiting for the kone eagerly.
Whatever you choose, its great to hear the flame is still going strong, I particularly enjoy sharing these kind of experiences, so tempts me to go back and try new/old things, I have a particularly strong hearing (at my age can hear up to 18kHz which is not common) so I bet my liking will evolve with the years.
Happy playing
Thank you for share your experience!
just a curiosity : FRFR 108 set seem be just push a lot of bass, was needed a subwoofer ? it improved or made sound more confused on bass frequency?
Enjoy man
Ciao
Hi
Depend of your music taste and budget.
In my opinion for low budget the best are Neural DSP plugins Plini and Holly.
The best for metal sounds for sure THU with great versatility with IR loader and Profiled Amp.
For great sound on clean and overdrive my prefer is Amplitube 4.
Ignite plugin for free are the best and you can start with them but for play
with them need of Daw: the others are stand alone.
Don't forget a good audio card ...Scarlett could be a good choice.
PS: Ops! I was forgetting Peavy Revalver : good sounds, IR loader, low price and you can insert any plugin you like on this stand alone!
Ciao
In my opinion Audiotechnica are to much bright : great for clean but to much open on overdrive sounds.
I replaced it with a Beyer DT 770 32 ohm more equilibrate on sound.
At the end depend of your personal taste
Ciao
Happy new Year from Rome !!!
Welcome on board !
Ciao