that´s my solution
Posts by christianbad
-
-
It would have been nice if the Kemper Kabinet came with a manual or something.
it´s all explained in the main manual, just download the most recent version.
-
have a look in the rig manager manual ( help menue):
You might already have created a number of backups with your PROFILER. Drag a backup file onto the application window, and Rig Manager will mount the backup as a location. Note that you cannot write new files to a backup. For most situations, it is advisable to mount, backup, and then copy all the files to anoth- er place - for instance your Local Library - this way you can easily access and modify files from a backup.
-
The Rig Settings provide a parallel signal path, which feeds directly to the Output Section, bypassing both the stack section and the effect modules X, MOD, DLY, and REV. When “Parallel Path” is activated, module A and B become exclusive to the parallel path, allowing you to add compression and EQ, for example. modules C and D remain within the regular signal path, along with the Stack and subsequent effect modules. This routing is visualized by the signal chain on the home screen.
Signal flow with Parallel Path
soft button ”Parallel Path” enables and disables this function. When enabled, the “Parallel Path Mix” parameter determines the balance between the parallel path (more to the left) and the regular signal path (more to the right).
If you use effects like distortion or compression in one of the two paths, you might find that the levels of each differ significantly. This is because the signal level is usually dependent on the instrument level, but this is often not the case when distortion or compression are involved. You can avoid level deviations like this by adjusting “Clean Sens” in the Input menu. “Clean Sens” balances clean and distorted (or compressed) sounds to equal levels. This also affects the Parallel Path.
-
hi,
könnte leider sein, das du ein montags gerät erwischt hast
am besten wendest du dich direkt an den support :
-
-
got my kemper kabinet, it´s sounds fantastic ( no metal metal sounds)
installed a kone in an open back kabinet, and for my taste, the kemper kabinet sounds a lot better.
both kabinets together gives nice stereo sound anyway
-
kann ich betätigen, klingt auch bei Zimmerlautstärke super
-
-
Bei mir ist alles ruhig, probier mal ein anderes Kabel.
Ev. steht der Aux level anders als vor deinem update (in den OUTPUT Einstellungen)?
-
I'm from Germany, ordered on Tuesday
i ordered on monday, got a notification from DHL that they picked it up today
-
it´s in the german store for 400 € !
2-3 days shipping -
Nothing on the thomann page
here you go:
-
Loop (Julia Chorus/Vibrato) > Delay > Reverb 1 > Reverb 2
Hi joshua, why do need 2 Reverbs at the same time, could you give me an example? Just curious...
-
wenn du im browser mode bist, steht dann unter dem linken soft button "All Rigs"? oder hast du die Anzeige gefiltert?
-
Did you check your output settings? maybe the main out is not set to "Master Stereo"?
-
- I can also cut the guitar that comes from the mixer and pan the guitar signal in the kemper headphones amp but I think this is not possible. As far as I know I can only pan al the stereo signals(also the AUX IN).
why not use Panorama in the Rig settings?
-
if you don´t store it, it will be gone . works in Browser mode too! you can assign more than one stomp to one switch and a lot more, it´s all explained in the MANUAL
-
there is a contradiction in the sentence
no, there isn´t. you navigate the slots within a Performance with the page buttons (Left/Right) and keep your edits. If you select with the 5 Footswitches and recall the stored version.
-
i prefer cables with Neutrik connectors.