Posts by tsachou
-
-
Parametric for Monitor Outs would be cool of course, but there is possibility that CPU power of Player is much less than basic Kemper models.
If it's that so - it's better to have at least Low/Hi cuts (which may require less CPU power) compared to don't have anything at all...
From what i have read , the KKP has as much CPU as the stage , i might be wrong !!!
-
To be honest, while I understand the desire for something to deal with poor onstage sound which varies from venue to venue, I have to agree with ckemper on this one - I just can’t see how low and/or hi cuts are the right tool for the job. In my opinion people should stop asking for low and hi cuts to be added to the monitor out and instead request a dedicated fully parametric eq or 31 band graphic eq instead. Like most people here I have played on plenty of crappy sounding stages over the years and have suffered from horrible boomy low notes often. However, the reality is that these are typically a result of stage/room acoustics and the problems present themselves at a limited number of specific frequencies. Therefore, using a low cut to just chop off the bottom end of your sound isn’t the answer. A better solution is to surgically tames the specific problem frequencies which needs the ability to target a narrow Q in order to fix the problem without causing even more damage in the process.
In short - I agree there is a very real problem which is important to many players and they rightly want a way to fix it. However, asking for the right tool (“feature”) to solve the problem would be more likely to convince the engineers to offer a solution.Agreed !!
-
If Low and Hi cuts will be the same for all outputs - it still will be better than not having cuts on Monitor Outs at all!
I was even thinking about somehow connect my tube amp from Main Out XLR! Only because it has those Low and High cuts....Right now when I connect via Monitor Outs to tube amp's return - I can only get usable sound if I set Bass at -12 and Mids and Treble at +8 or something. Only then it sounds OK in terms of bass frequency amount. But such crazy EQ is not too cool and correct to use I think.
There should be way to remove all unnecessary lows from those outputs!!
It's unfortunate i can't really voice my opinion truthfully on these forums as some users are too sensitive like they either endorsed or looking for endorsement , but i really feel that these option should be available to us just like in the Kmeper stage or at least let us assign it to either Main OUT or monitor OUT . The logic of not giving us the ability to do a low cut and high cut based on How one feels makes no sense to me . TBH i really need that option, I perform 2 to 3 times a weekend they usually provide a powered monitor and sometimes i could really use a low cut
-
tsachou I know what you mean and understand your reasoning.
Here is a link to the thread where CK had a detailed debate with usersmabout why he believes cuts formthe monitor out are not only unnecessary but actually the wrong tool for the job. Its in German so I had to read it with the translate option but it was worth it.Low-cut High-cut im output menue
Hallo,
dumme Frage, an die Experten.
Wie setzt Ihr den Low-Cut High-Cut im output-menue ein?
Hintergrund ...
Ich wollte damit meinen Bühnenmonitor (Kemper Kone) im Low-End etwas aufräumen damit ich dem Bass nicht so ins Gehege komme.
Früher als ich noch Aktive FRFR Boxen hatte, konnte ich den Bass an der Box einfach etwas wegnehmen.
Wenn ich das jetzt mit dem Low-Cut mache beschneide ich aber auch das Main Signal.
Das sieht wiederum unser Tonmeister (FOH) nicht so gerne. O-Tone "Wenn hier jemand…
lol thanks but i can't understand anything
-
They definitely look though the posts and see what people are asking for then decide what they think should be added to improve the system. However, CKemper has stated explicitly that he believes it is unnecessary and is the wrong tool for the jon. Based on that I would be surprised to see it added any time soon. He may change his mind but if I remember correctly the last post seemed pretty clear that the official view is that Low and Hi Cuts should be set the same for all outputs. Please don't shoot the messenger. I'm not commenting on what I personally think is wrong or right but merely stating what has been said several times by ckemper
That's too bad for a player like me .
Let me explain , My band has sound. man , so in all of my setups 1 output goes to him he does what he wants with it I then use another output to go to a powered monitor and some of them sometimes do not have have a low cut ot high cut option . That is where something the Quad Cortex shines it Has a full 5 bands eq option . I have currently have , tonex , hxstomp and of course the kpp . i set my main board around the kkp it works good because i can't be without that volume button with the option to link to just monitor out that low cut high cut option would have been awesome . although i prefer the tone out of Tonex Best .
-
hope i will see that in the player one day as i dont see it there now
-
i think i take my pedalboards too serious
-
Or at least, if there are some hardware restrictions - maybe it's possible to do output EQ assignable ? For example, so it could be moved to Monitor Outs leaving Main Out without EQ.
Even this will be more flexible and usable in different situations.I KNOW , In some other devices like the quad cortex you have that option to chose which output you want to apply the eq to .
-
Display More
Hi!
Could you please add add Low and High Cut EQ to Monitor Outputs ?
When I play live - I plug my Kemper Player to PA using Main Out. But also I have it connected to return of a tube amp to hear myself on stage.The problem is that low end coming from guitar cab can be really over-the-top, huuuge amount of bass which is unusable to be played from real guitar cab. It would be cool to have possibility to cut this low end without changing the sound which is coming to Main Outputs.
Thanks in advance!I am begging for that too
-
Hi guys, I want to know why my Profiler Player's lights is off after I plugged in the original cable, and didn't work at all. I tried reconnecting it, but that didn't help. Is that normal?
you mean the original power supply ? well i would try to do an update either with the latest official firmware using a usb drive . the how to should be in the download folder
-
-
Are you saying American will let you take a guitar on as a carryon
Yes , your other item must be small enough to be considered a personal item
-
if the size of whatever you put put in is within a personal item size you are good . I travel American airlines 98% of the time . i use to cary my profiler STAGE in a backpack and my guitar as the carry-on without issue .
-
-
Miles Ahead !!
-
Hi everyone. Recently got a Pirate MIDI Bridge4 to use with my Player and my Strymon Sunset. I've been able to dial in sending commands to the Sunset successfully, but not so much with the Kemper. I've been trying to use Pirate's device library, which has the Kemper Profiler and is supposed to work with the Player as well. But the commands don't exactly line up with the Player, and i'm not having success. Has anyone else given this a go?
I'm trying to change between rigs 1, 2, and 3, as well as to toggle on and of FX 1 and 2 and delay.
Have you set the midi channels for both devices ? how are connected to the player midi wise ? usb ? 5 pin din ? usb midi adapter ?
-
Maybe this hint can help you.
Your power consumption in ampere is correct, but in the first moment when you switch on everything the electric current can be a lot of higher.
So what happen if you disconnect for example h9 and the master mind. After the Kemper is successful booted, than connect h9 and mastermind with power.
Well , it never restart when i first power the board plus gigrig still have over 1A in total power consumption available . The thing is that , i can play a full gig or even an entire weekend ( 3 gigs ) 3 to 4 hours each and the kpp never restarts . So it's not too big of a deal at the moment . if that would happen more often i will change the power system i have a cioks dc7 for my quad cortex setup that i barely use the whole board so.. i'm ok for now . thank you
-
Nice board. Mine had (actually still has but it's in a container and hasn't been plugged in for 4 years) a Mastermind PBC10 as well as various highn current pedals which needed adapters. The gigrig power system is nice but all the distributers/isolators/adpters soon added up to a seriously expensive system which took up a huge amount of space under my board.
Is the KPA connected to the Distributor or one of the isolators? Isolators only provide 100ma on each output.
the kkp has to be the first connected to the distributor
-
Just to ease the thoughts
