Posts by z3bratrio

this protocol didn't solve the problem:[*]Switch the main knob to off
[*]Hold the left/top soft-key above the LCD
[*]while still holding this key - switch KPA to tuner
[*]Maintenance Module will be started
[*]In the 'Maintenance' menu goto 'Memory'
[*]Use Memory FormatFlash and InitFlash
[*]Check if the KPA works (booting, tuner)
[*]Check all the KPA settings

HELP: kemper clipping noises
Hi to you all,
My unamplified kemper rack makes some clicking noises with no effect loop or no instrument plugged in. On all my outputs. Unpredictable noises. No specific rythm
100% sure: It is not my electrical system. Not my powered speakers
Thanks for your help.

I posted a video here
https://www.facebook.com/fredzebra.trio…t=group_comment

Hi,

I have finished setting up my performances. All worked fine until now. When I switch on some (not all of them) rigs in my perfomance, I experience a massive jump in volume for Half a seconf I would say. Then it drops off to normal

What is that guys?

Hi guys,

I used to have a g system and as you can assign any switch anywhere on the G system controller. I designed some magnet label (with magnet paper for inkjet printer) and It would stick to the aluminium board without being too aggressive.
This kind of paper doesn't stick on the remote thick coat of paint...
What do you recommend me to label my tap function, my loop on/off...
Paper masking tape? better ideas?

thanks

fred

that's a shame, The midi clock is set to on and works perfectly for tap. it's so close...

as for me, I would like to freeze my strymon timeline which is in loop X with the remote. I send the midi clock and the tap tempo control both the timeline and the kemper. But on the timeline I can freeze the delay by pressing the button constantly, I would like to be ablte to do so with the remote, impossible then?

thanks a lot it works!

I still don't know how to use my DV3 for wah in performance 1 and for morphing into performance 2. Is there a menu, where I shall specify the use?

Do you have any link for a simple morphing tutorial?

thanks

I'm looking for the same "freeze" function but no reply anywhere...

At the moment, I'm trying to control a Kemper with my g system but
Everytime, I press any switch, I turns the Kemper tuner on and It
wouldn't turn off.

I realized that the encoder A CC is 0 (31). I would like to change the
number between brackets because (31) is exactly the midi cc that
triggers the kemper tuner.

I saw on this video at 2.27 that your number between bracket is (000) how can I do the same please?

PS: my firmware is 4.05 on a Ib Modified version

Thanks a lot!

yeah I know the number I can change is just before the number between bracket. But it doesn't change anything...
what is the number on your G system on this page
ENCODER A CC.... (NUMBER?)

thanks

At the moment, I'm trying to control a Kemper with my g system but
Everytime, I press any switch, I turns the Kemper tuner on and It
wouldn't turn off.

I realized that the encoder A CC is 0 (31). I would like to change the
number between brackets because (31) is exactly the midi cc that
triggers the kemper tuner.

I saw on this video at 2.27 that your number between bracket is (000) how can I do the same please?

PS: my firmware is 4.05 on a Ib Modified version

Thanks a lot!

Hi guys

I want the G to control my kemper. And now I having trouble I guess Because of encoder A Button Which I guess send the cc31 all the time. IT is unfortunately the cc to control the tuner on the kemper.
So when I turn everything on, and presse any switch on the G, the tuner would turn on and Never switch off

I think the mess with the kemper comes from the number between brackets after the Encoder A CC which is (31). It corresponds to the tuner of the kemper! and shuts every sound off and won't turn back to normal.

How can I change this number between brackets?
in this video, at 2.28, the number is (000) how can I do that?

Please add
Midi bank select messages lsb+lsb on program changes for device A and B

YES! Please kemper team. SMALL UPDATE, BIG ACHIEVEMENTS!

Yeah it is what I need to control the user patches of my g system
+1