I also use a Voice Live 3 and like other vocal processors it has a guitar pass thru socket, so you just plug into the vocal processor first, then thru to the Kemper.
Thats great if you have no sound coloration (I have one). VL3's Guitar Thru is buffered and no True Bypass.
I am using a send in Direct Out mode to my VoiceLive3. This is an unprocessed signal and works best for vocal harmonies detection.
🥺
Hi theplayer,
sorry, for late response.
From the study of the Edge's Guitar delay the edge is using for electric co a dealy of 280 ms. Instead of choosing a note value and setting a bpm you can switch of the tempo sync button and enter the 280 ms directly. If the feedback of the delay is to loud, you can reduce it with the mix knob. If the delay repeats to less or long you can adjust it with feedback. HTH.
Here's a profile as starting point: U2 - Electric Co V1 - 2024-02-29 18-42-42.krig
So cool 
there is a serial two tap delay. So instead of two single dealys, only one stomp is needed.
One / last try - "U2 - Where the streets V4 - 2024-02-22 20-15-58.krig"
And a short soundclip
Don't know what's the problem. I renamed it in my profiler now to "U2 - Where the streets V3"
Heres a new link:
Can you tell me which one is th right one now?
It's the first one in your list (based on the free rig from And44). I think you have to delete this and then try to import it again.
I put your audio example in a DAW and so far I can see besides the 3/16 (1/8dot) they add a 8/16 (1/2).
Did the edge really use it like that?
However, with the dual delay I don't see any way to adjust the volume to a lower level of the second delay (8/16).
That's why I am using now two single dealys. Sounds good to me too, but different.
https://www.dropbox.com/scl/fi/as6pbv4…ym0wipl0g8&dl=0
Check it out 
I recorded with these settings a short clip - sorry for crappy playing and mix:
https://www.dropbox.com/scl/fi/m9tcbkk…iz8gkkmm99&dl=0
The profile I used for this is here:
Ta strona może być bardzo pomocna...
This is the same setting I used for streets. (dual delay / mix 98 % / duck -0,2 and rig is set to 126 bpm) HTH
| |||||
Absolutely unnecessary. This delay is a metronome of itself, if its settings are properly constructed!! The real key is: HOW?
For everyone: Look, see and listen here. I now hope that all know what I'm talking about because I don’t want this topic to go out of hand. Pay special attention to what he says at 1:45 !!
As far as I am aware the rigs are played back exactly as they were created in the bigger Kempers they just can be edited as much while in the Player.
If hope really thats true.
Unfortunately, not all effects are available on the player, especially the transpose fx, this hits me harder.
Ha - Thought I need no more pedals but this is a must have one 😂👍
Merry Christmas Kemper Fans 🎄🍾🥂🎁🎊
Glad it’s working again.
For safety
Before a firmware update I create a complete backup of the profiler.
I stored my live performances also in my local library.
So just in case something went wrong I can quickly restore it.
HTH
On which Firmware 12.2.1 or on 12.2.2 (released today 10.2.2 avoiding USB communicatin issues at Stage models)
Is the sound also with headphone out bad?
Cab is on?
For acoustic I use an electric with a Piezo pickup and run it through some Bert Meulendijk acoustic rigs.
Same here 
I can feel your frustration. But I am sure many thousands updates are successful like my own updates on a kemper toaster and Stage over almost 10 years.
Do you have opened a support ticket?
New OOR single released today 🔥🤘🔥
