Posts by Tandrin

yes. Theres a MonoStomp for placing external(s) before amp and a stereo stomp for placing after amp. OFC Monostomp works after amp, too.

Had a tc mimic a longer time placed after amp.

hehe. The last days I tested the kemper drive (had not that much time). I didn´t care about the presets. Just fiddled around with it. I really like it. I´m not really into tube screamers, I prefer my klon clone (or at least more transparent overdrives). This thing does much of the trick. My last wish for the kemper is fulfilled.

uhhhhhhh

today no chance for testing!

What does the Kemper Drive? Neeeeed to know noooooooow!

Quote from DonPetersen

Afaik this is Christoph's version of 'what a noise gate should do' and doesn't exist outside of the PROFILER.

Ya, I knew it

but hey, it´s a dream for recording guitars!

Hi Guys,

I wondered if there is any Gate-VST-Plugin that´s so tremendous good like the kemper noise gate (speaking of the input gate with dedicated knob, not the stomps!)? I love that thing and how it is working. Would be so nice on synths. I really don´t get it how the gate is working technically, but it is obviously not a simple cut of below a certain db.

And no, I don´t wanna play all my hardware synths through a kemper (or better 6 Kempers).

any Ideas?

For me the general type of the Klon-distortion would be wonderful and enough. I am not in search of a special single sounding device. The Kemper Stomps are often far above what can be done in hardware (think of the ducking etc.). So I hope for a surprise and a very broad usable "Klon"-Type Stomp.

The main charackteristica of that toy would be cool (no screamer mid hump! Broad sounding overdrive. And this strange mix behavior of the Gain Knob :)). I am not interested in the minimal and partly esotheric differences between some Klons. Take the KTR and clone that Klon into a stomp and I think pleeeeeeenty of people will be happy. The others already have their tubescreamer stomp

CK from above, you gave us the green scream
now give us the Klon Clone

and let us teenagers of the 90s shine, too

pleeeeeeeaaaaaasseeee!

goodnight!

Quote from DonPetersen

Multiple sources with notacibly different levels of distortion will not profile correctly since the PROFILER determines one level of distortion.

What you could do is to listen to the raw (!) output of the Klon (at 100% mix) only and select a Stomp that is close. Add a Studio or Graphic EQ post Stomp and adjust for differences.

Then reduce the Mix of the Stomp to your liking and add Direct Mix in your AMPLIFIER, too.

hth

Yah, that´s my plan someday. But for now, I have no idea how to get close to a klon (I asked in another thread if somebody has found a way to get a Klon-like sound out of one of the stomps). But you´re absolutely right (ofc), listening to the raw preamp signal could help a lot, good idea.

Aaaaaaaand this is more a scientific question on how the Kemper would translate multiple distorsions and gain stages into its serial distorsion programm.

If I get any experiences during "re-profiling" soon I will share. Hey, maybe the mix of the distorsions glued into one will make some happy accidents

Hi,

a question runs around my wrinkled brain.

Basic Information (bevor anybody asks "but why???")
I have a Klon Klone in front of my KPA (until they make a nice stomp fx of it) which is half or full gain (which is in fact a wet 50% and a wet 100% Setting because they gain is told to be a mixer knob and not a real gain).

Then I have my high gain Profile and in the cab section I mixed about 1 to 2 of the "clean" Signal into it.

soooooooo, it is in the best case a 50/50% mix of clean and gain (klon) and then into a high gain amp with clean mixed in. Got it?

Don´t ask, I like to have about 4 gain stages/types mixed all together. I like the Sound.

NOW THE QUESTION:

What happens if I Profile this path? To make it a bit better to understand: what happens if I Profile an AMP with a bit of original Signal mixed in?

The Kemper can Profile Serial paths perfect. But what´s with parralell paths? Does it work as good as profiling with several mics mixed (which is a different thing of course because that is profiling an eq curve roughly said).

That all is just theory. And I will Profile my set via another profiler just t see what happens. Maybe it will be usabel, even when it is different.

Remember, I like experiments. There are still my profiles of the Virus TI Distorsions in Rig Manager. hmmm, could do some new btw.

ADD:

The bass Players among us use that trick often. Parallel paths for clean and distorted. Did someone try to (re-)Profile such a path?

Hi Guys,

for a project I search a nice rig or ideas about a sound like static x guitar sound

(Example:

I know a Marshall MG is used. But the amp name is irrelevant for me (as it is for many kempers). I just search for a Rig (commercial is ok too) that has that touch. For me it seems like a very distorted, yet "soft", deepless sound. Hmmm, usually I prefer the other way round. BUT for that project, it shall be sth new.

For me it sounds a bit like middless terror :). So Screamers are not that good idea for thinning the sound, or?

I use a framus Idolmaker mainly, that git should be able to get that sound if the AMP or CAB gets in the right direction (pickups can be split).

blablabla - Ideas?

PS.

I love this forum, and read much but don´t write much. The talks here are so usefull!

PPS: aehm... I hope that is the right place for my question. Please move me, if not. Next time I would do better, promise!

+1

and an option to put the Kemper Screen to negative

Quote from ReneLangenhan

Tandrin try the additional Compressor for more "soothing" - I know what you're talking 'bout

yah. I experimented with that. It is like a compressor is one side of the thing. But the other side is missing. And that is clipped sound, not compressed. So a Disto or overdrive must be in parallel. And that is the tricky point. It has to be paralell clean compressed and overdriven and then mixed again, and THEN into the AMP.

My problem is, that I like to mix in some Direct Mix (2.0) in the cab section (which sound awesome on highgain and that cheapo Klon Clone). So the parallel path (the bass player thingy) is not suitable for what I want. I just need a parallel compressor/overdrive with mix parameter and without coloration. So I need a Klon Centaur thingy as a Stomp. Hopefully Kemper will add this nice disto technique as a stomp someday.

+1

just got a Klon Clone and I really like it (far more than any greens or OCDs). But I hate to take Pedals on the stage since I got the Kemper. So I´ll try out the "mouse" workaround mentioned earlier. But yes, a nice Klon stomp is really missing in the Kemper as I see it.

edit: just tried to get the sound of the pedal (or even in the direction) with one of the earlier mentioned tricks and settings. Nah. Not for me. It is not any near that soothing (hehe, you know that vst plugin?) sound...

So: Make us a Klon Stomp for the Stomp section! Pleasssssse

That worked! Thanks!!!!!!!!!!!

I feel so stupid now. Besides that I updated Rig Manager, but never came to the idea to check the installer for a repair option.

Thanks @Arne

by the way: thats my name (Arne), too. I was seriously irritated as I saw "Arne answered"

thanks again!

Hi,

since some weeks I have a problem with connecting the KPA with RigManager.

It worked on this system before, with Win10. RigManager now doesn´t find the KPA. To update drivers via Device Manager ("Geräte Manager") does´nt do anything.

Checked other USB Ports. Nope.
The USB Cable is the same that´s always on the desk just for the KPA for years. (and as you see on the screenshot: the KPA is recognized, but the driver is not ... active (?))
The problem was there before the Reverb Beta. I´ve updated to the Reverb Beta via USBStick (before that I´ve updated via Rigmanager).

hmmm... help?

nicy! I like to do sometimes 100mix (so no original signal) on the new delays to make interesting Introsoundscapes (not for live, but studiostuff). And these reverbs are promising pads!

@ckemper

first: love you (don´t tell mum)
second: would you mind to implent your spring reverb in the virus when it´s final?

Very nice done. Can only get better.

Vibrato to C, Spring reverb to D (50%). At the end a little Crystal delay and a hint of Hall. My new dreamy preset!

I dropped dripstone down to -5. Spectral bal to 2 and springsize to 10. Sounds very lush.

Great. I love drippstone! Up and it sounds very ... wet and drippish, and down, all the nice spring sound WITHOUT dripping. Soooooooo nice! Spectral balance is unbelivable usefull.

already have a real nice new preset with

Improvement idea:
my 1975 Kitty hawk has a tube driven spring which is nice, because the tube brings in some warmth into the reverb trail with a hint of overdrive. BUT I have to say, again, sprectral balance does the trick, too! So maybe you want to give in a little tubeoverdriveoption like in the delays.

+1

for the tremolo IS my Fav Mod FX.

Variable Speed. Variable Forms would make it really mighty. Maybe some fancy sideeffects like they put in the delays. Maybe an additional damping option (the louder the FX Signal, the less dampered, the quieter the Signal the more damping).

ohhhh yessss.

Hi,

ich fühl mich grad etwas doof. Irgendwie hab ich doch sowas schonmal hinbekommen vor dem Kemper.

Also, im Studio benutz ich nach dem Kemper noch ein VST-Plugin auf meinen Gitarrenaufnahmen (Quadrafuzz) um eine spezielle Würznote hinzuzubekommen.

Jetzt würd ich gerne diesen Gesamtsound (AMP + Plugin) gerne profilen. Mal egal ob das überhaupt was werden kann, hier die technische Frage:
Wie geht das? Die ganzen Plugins weigern sich völlig bei mir im Input (also Live) zu funktionieren. Wie bekommt man das hin? Die Pluginverzögerung ist dem Kemper ja angeblich recht egal, und das eine Plugin macht auch kaum was.

Oder mal jaaaaaaaanz kurz:
Wie profile ich ein Cubase-Plugin? Externe Progs für Live? Welche? Gibt ja nicht ganz uninteressante Distorsion und AMP FX im Plugiversum, der Trick könnte also nochmal interessant werden.

Cubase8
Soundkarte (Steinberg UR824)
bisher gehe ich analog rein (also nicht SPDIF, hat die Steinberg nich)

did the "hold rig button during startup"

Problem solved!!!

Broken Rigs seemed to disappear.

thanks to support page on soundside.de (greets, someday I might buy something just to thank you!)